Network Access Control

Hi all,i'm trying to configure ACS Radius and a Pix to work as Proxy Cut-Through.i wanna set up some acl to have a certain type of traffic for some users and another one for some others.I tried by downloadable acl but it doesn't work (could it be ca...

how do I add service = junos-exec to a user profile using ACS for windows. This is straight forward in the Unix ver (ACS 2.3.6) through the CLI but does not work within the Windows version. I need to enable authentication of the Juniper routers using...

We currently went from using 4 /24 networks as our NAT pools for Internet access. We just added a PAT address as the NAT pools were full, and now any FTP requires authentication even if the user is alrady authenticated. HTTP and telnet are fine. W...

Hi, has anybody configured a working access to OWA 2003 (outlook web access) through SSL-VPN over the ASA 55xx using the OWA form-based-authentication ? Thanks a lot,Frank SchorbCCSP

hi,please tell me can we use the ACS server for outside and inside users of the corporate to authenticate authorize and accoun to access the FTP ,web and SMTP corporate server,please tell me how.e.g. a user is accessign the ftp server can we authnti...

How authenticate WebVPN with a Microsoft Server 2003.

I configured dot1x on a 3550 port which is connected to a Windows XP client. I am using radius and I can do debug authentication and I see the switch asking the client to authenticate, however the client machine never prompts for authentication. The ...

Hello all. I have 2 x ACS 1112 Solution Engines v 4.0. When I do a shutdown either through HTTP or the console, my understanding is that the ACS should eventually power itself off.Having tried this on both ACSs a few times, this doesn't happen. There...

I am a little confused as to how logging into the router works with AAA and the local username database.First of all I have AAA Authentication enabled and using a TACACS+ server. I have created one username xxx password xxxx for emergency access and...

Hi all.I configured a PIX515E running 7.1(2)software for cut-through proxy.I also configured "aaa authentication secure-http-client".Then, I proceeded with manual enrollment of an "official" certificate, signed from Verisign, following the document a...

Hi,I have a cisco secure ACS 3.3 solution Engineer server which i'm currently using as tacacs server for authenticating some network communication engineers who changes routing configs on the network. Now, i want to deploy 802.1x on the network and n...

How can I configure a WebVPN filter using VPNC3000 RADIUS attributes? Only using Cisco AV?Thanks.Andrea.