Network Access Control

Hello Security Guru!!!dit somebody got any expreience with the sigle sign-on Authentication?thank for your helpAlain

In my last message about "PIX intermittently stops AAA with CiscoSecure ACS/NT", I was asked if I was using the older 'aaa authentication include...' command to invoke CiscoSecure ACS / TACACS services on my PIX 520 with OS 6.1(1). That raised a big ...

Wondering if anyone has had this problem before, I just downloaded the trial version of ACS 3.0 in order to see how it works for wireless authentification, im trying to get it set up on a Windows 2000 Server on a Dell Server machine(with a clean inst...

Hopefully someone has heard of this...I have a customer with a PIX 520 (with 6.1(1)), which does AAA (Authentication Authorization Accounting) with CiscoSecure ACS/NT to authorize users to access the internet from inside the firewall. From time to ti...

Here is the problem:I have Citrix server inside and want to authenticate outside users for that service. A have ACE server installed inside speaking RADIUS. Since PIX can not autheticate traffic other than http, ftp and telnet, I need first to authen...

Hello, I have a remote windows 98 machine that is part of a windows 2000 domain and authenticates to the PDC across the vpn. This works fine with no prob, but I want to protect the PDC / mail server that is connected to the internet with reflexive A...

I know that we can setup AAA to log information about who logs into the device (and failed attempts) if we were using RADIUS or TACACS+, but we are just using local usernames in the devices. Is there a way to log this information to syslog in any wa...

At the university of hartford, we would like for our leap authenticated users to be assigned an ip address by the ACS server itself, like a modem pool. Is it even possible to set up dhcp in such a way with ACS 3.0 so that only leap authenticated use...

we are installing acs v. 2.6 and we would like to know if it's possible to assign ip addresses from the dhcp server when we use tacacs.

Does anyboby know which are the ports that the ACS v3.0 on Windows2000/NT Server opens? This is because I have to open an access on a Firewall for people connecting to the ACS to manage it by browser.

i have a vpn client3.1 (w2k pro) on the one side and the pix 515 on the other side. for authentication i use the ias of w2k server as a radius client.establishing a tunnel works perfect with preshared keys, but how can i authenticate to the lan behin...

I have a W95 workstation using the VPN 3.5.1 client which connects to a PIX with no radius/tacacs authentication. The VPN client brings up a logon window which, if the username/password is typed correctly, all is well. If it's not typed correctly I...

Hi all,I'm trying to find a way to make my PIX perform an HTTP authentication on the port 8080.I thought that addind a fixup protocol entry for HTTP (fixup protocol http 8080) and an item in my authentication access-list would be sufficient, but I st...

Do you know of anyone who has successfully used the above configuration toconnect using MS Windows 2000 native L2TP/IPSec client with PAPauthentication (and machine certificate for IPSec authentication)?When we try it, it results in an err 691 , not ...

I set up two 3015 VPN concentrators at different locations that authenticate users via the same RADIUS and LDAP servers. On one concetrator I can authenticate users that are listed in my LDAP directories in the user@domain format. This does not wor...