Network Management

Hi,At RME: Tools Syslog Syslog Collector Status screen at table Collector Status No records.I had changed hostname on this server and i have ran /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/hostnamechange.pl script with proprer parameters.Now I cannot add c...

Hello. I have installed LMS 4.0 and having problems with Backup. I get the following error message: "Database Engine 'dfmEpmEng' could not be started on the database 'dfmEpmDb' in bulk mode. I've seen in some log files and found the following message...

Since we moved a couple of cards on 2 6500 in VSS we keep gettingOperationallyDown faults on the slots where the cards were. Example: Event_DescriptionOperationallyDownDevice IPx.x.x.xDevice TypeSwitches and HubsFault Last Updated At25-Mar-2011 10:51...

When I run this with "event manager run jb.tcl" with 15.0(1)M2,  the "--More--" prompt interrupts the output at different points every time I run it. My terminal length is set to 35. Is there any way to get the "--More--" prompt to work correctly and...

Using Sync Archive,  on RME 4.3.1.When we sync the configuration of all 3750 switches, for some of these we get this message*** Device Details for C3750-p-2 ***  Protocol ==> Telnet  Selected Protocols with order ==> Telnet,SSH,TFTP,HTTPS  Execution ...

Running Ciscoworks LMS 3.2 on a Windows 2003 box. I would like to use Ciscoworks to discover Cisco IP Phones across our campus. I already have the access switches managed by Campus Manager and they have the host information in its database.What I wou...

Pls let me know the differences between LMS and NCM, both look almost similar.

Hello,I would like to use a compliance template for check of an aaa settings. I want to use the command aaa authentication login default group radius local on all devices. There are the different aaa authentication configurations on devices in the ne...

I installed this patch for UT support for Nexus 7k in my LMS3.2 (Solaris 10)At the end it asked to reintit the camput manager database, after the reinit I ran the data colletion but it found zero devices. Data collection ran again this morning at its...

I am receiving the following error on jobs that i have created and have been approved to run. ERROR:RME_CDL1004:Pre-Job execution operation failed I have run simlar jobs but just started to receive this error.Teddy Agee RPC

Hello CSC,I would like to discuess  on CUSM,Cisco Sensor 1040 report, MOS = Unavailable .We have installed and Configured 5 cisco sensor 1040 on different location including Head office and branch office.From Csico unified Service Monitor > Sensor Re...

I have dozens of cat4056 switches unable to get UT from them. snmpv3 configure and snmpv2 for read only. the credential test has been passed. data collecton and inventory properly collected.snmp context properly configured. is there any other thing s...

Hello,I have LMS 2.5 for windows, due to server performance I have to move to another server so I done as follow:1. backup data via GUI2. copied the backup to the new server3. switched off old LMS server4. configured new server like the old one (ip a...