Hi,1. I want to configure thresholds for sources in IPM and it should generate traps if those are violated. how to go about it? 2. Is there any way that the IPM traps generated, be processed by the same CW. 3. How to get UT-Lite for windows.
Having problems with collecting Vlan config off of 3750 switches. We currently only allow SSH access to the switches, and I have configured the transport protocols as SSH,TFTP for config fetch and deploy. Am I missing something?
my Solaris server configured to use ipnodes for Cisco devices discovery.instead of host file.I don't have permission to host file. the script I have to access Cisco devices using snmpwalk and snmpget. the problem is net-snmp not able get name resolut...
I need to run a report on all the switches and figure out which swithces in my network dont have a particular vlan assign to it example wireless vlan 203so the report would report what swiches dont have switchport access vlan 203 on the port.
Can I use JRE version 1.6_15 with Ciscoworks LMS 3.1? Our security team wants to move us to the latest version due to some vulnerabilities. Thanks in advance.
Relatively new to the product. I would like to use this to monitor cpu/memory utilization of a switch...Is there an a module that performs this function? I dont seem to be able to locate it in RME or CS...Bruce
Hi,We have LMS 2.6 with DFM 2.0.11 running on Window server. I have set up e-mail notification for all of DFM events. This was working for a certain time (a couple of weeks), then stops working now. New alert events can be found in "Alerts and Activi...
Dear Netpros, When executing TRACEROUTE command on router(without giving source IP address)..then by-default which IP of that router/L3 switch is working as source address , If this ip is the router-id or highest IP address of that device then wha...
Dear all, i m getting the following error, how can i rectify thisTELNET: Failed to establish TELNET connection to 192.168.209.44 - Cause: Authentication failed on device 3 times. VLAN Config fetch is not supported using TFTP.Could not detect protoco...
I have created different groups of devices in DCR. But i am not able to see the devices in the topology views even if there is L2 connectivity within themselves.
Hi Team,I am new to CSM Implementation and my customer has following queries.1. Can LMS And CSM clubbed in the same server2. Can we have the common RME for LMS and CSM as both of them have RME.3. They want the CSM 3.0 to be upgraded to CMS 3.1 is the...
hi, 1. I could not get end host details in UT for clients connected to autonomous AP. 2. will the topology change realtime if i change something in the network structure. 3. i am not getting the syslogs /traps if one of my stacked switch is down.
Hi,I have a misatch of the devices in RME and DCR. There is noACS integration.DCR has 205 devices and RME has 201 and the auto mode is on for RME.CM after discovery show 900+ devices.What can be done please suggest !-Thanks
We have a master / slave cw2000 lms setup with devices showing up on the slave but I'd also like to see the netconfig jobs from the master on the slave system. Is there a way to import them to the slave system?
