I am trying to fetch data on netflow analyzer 9 by Cisco router 2911. But netflow is unable to show any data. Kindly help
cr2911-01#sh runn | sec ip flow
ip flow-cache timeout active 1
ip flow-export version 5
ip flow-export destination 10.1.208.32 9996
interface GigabitEthernet0/0
description Connected to LAN
ip address 172.16.250.14 255.255.255.252
ip nbar protocol-discovery
ip flow ingress
ip nat inside
ip virtual-reassembly in
ip policy route-map divert
duplex auto
speed auto
end
cr2911-01#sh runn | sec snmp
snmp-server community public RO
snmp-server community public RW
snmp-server ifindex persist
snmp-server location DXB-DC
snmp-server contact abr@abc.net
System image file is "flash:c2900-universalk9-mz.SPA.151-4.M4.bin"
cr2911-01#sh debug
IP Flow:
IP Flow cache allocation debugging is on
IP Flow export mechanism debugging is on
cr2911-01#sh logg
Nov 10 13:09:05.006: IPFLOW: Error sending export packet: Enqueued to process level
Nov 10 13:09:07.006: IPFLOW: Sending UDP export pak 927581 to 10.1.208.32 port 9996
Nov 10 13:09:07.006: IPFLOW: Error sending export packet: Enqueued to process level
Nov 10 13:09:08.006: IPFLOW: Sending UDP export pak 927611 to 10.1.208.32 port 9996
Nov 10 13:09:08.006: IPFLOW: Error sending export packet: Enqueued to process level
Nov 10 13:09:09.006: IPFLOW: Sending UDP export pak 927641 to 10.1.208.32 port 9996
Nov 10 13:09:09.006: IPFLOW: Error sending export packet: Enqueued to process level
Nov 10 13:09:10.006: IPFLOW: Sending UDP export pak 927671 to 10.1.208.32 port 9996
Nov 10 13:09:10.006: IPFLOW: Error sending export packet: Enqueued to process level
