SNMP configuration in Cisco ASA 5525x

[Bertran2013]

Snmp server is sending to me the next message: "Community with read/write permission required". Please help me to configure read/write permission into communities.

The firewall is ASA 5525x

Thanks

[JEFF SPRADLING]

snmp-server community xxxx rw

where xxxx = your read/write community name

[Bertran2013]

The firewall don't accept "rw", that is the problem.

[johnd2310]

Hi,

The ASA does not support SNMP write. You cannot configure rw on the ASA. Only read(ro) is supported.

Thanks

John
 

[JEFF SPRADLING]

Thanks for the correction, John.  That actually makes sense from a security standpoint.  

[Jerry Paul]

Hi,

Firewall do not allow read/write permissions. All you can do is to set password on different shells of firewall.

Jerry Paul

www.thenetworkhardware.com