Hello, We are currently have a Cisco ASA 5512. We are looking to procure the FTD protection license to have features like DOS protection (Rate limiting) , URL filtering etc. Reading online i think the latest FTD software version is 6.2.2 What happens...
My firewall isn't accepting the no shutdown command even i don't have any option to go into config t mode, i'm sharing show run information with you guys so you can help me in this regard. All interfaces are shutdown state except mgmt int. This probl...
My customer is running an ASA5505 with 8.3 code.The have a somewhat flaky proxy between their inside LAN and the firewall. I'd like to have a configuration as follows:LAN > Proxy > VLAN 1 (eth0/2) on ASAandLAN > VLAN 1 (eth0/3) on ASASo that in th...
Hi , Can any one help me to find where to download version 9.1.7.23 for ASA 5515 ? Thanks
We had some routing issues and during our troubleshooting, we found that our wireless guest network is routing over our primary outbound interface. We have a backup outbound interface configured on the ASA, there are two outbound interfaces. We wo...
I need some specialists to help with this: We have 2 ASA5506 with same configuration in two spoke sites, IPSEC-vpn-connected to ASA5515 in the hub site (same hub-spoke vpn). Internet and cross-site traffic works very well, but after some hours on...
Hi ALL, I have to migrate from Cisco ASA + Firepower (5585 ) to FTD 4110, can you please guide with me steps to follow. I didnot see any documentation to migrate the firepower polices to FTD , only ASA to FTD migration documentation available.
Experts Please correct me n FTD do we assign the IPS policy to ACL or do we have to create an inline pair. Am moving one firewall and one IPS to FTD.
Hi, One of our clients has an oldish 5512 ASA that is not Firepower capable so does not have the "X" designation. We wish to upgrade this to deal with the recent vulnerability discovered with the webvpn component. I have the requisite support contrac...
Hello, I have an ASA Firewall with SFR capabilities that has 2 routed interfaces: Inside and Outside. I need to reconfigure the physical inside interface, make it trunk and create 2 subinterfaces: one will be the previously inside interface and add...
We have ASA5545-X with SFR module installed. i need to upgrade ASA software from 9.5 to 9.8. and i want to do the upgrade only on ASA. while i dont want to make any change to SFR. i am confused whether upgrading ASA software will have any impact on...
Good day forum users. It is my first post here, and I am seeking for your support on one problem . I am trying to first setup the ASA5506-x and it seems that something missing in image file shipped with HW: firepower# show module all Mod Card Type...
We have an Active/Standby pair of ASA5520 devices connected to the core with a /27 public IP address. We also have an Active/Standby pair of ASA5525-X devices connected to the core with a /28 public IP address. The default route from the core goes ...
Hello.A customer has today up&running a FirePower 4110 with Thread Defense + Malware License. He now wants to add Radware's Virtual Defense Pro.From the HW perspective, is it needed to add something else?From the services chaining, could all the serv...
Hello All, I am new to ASA & looking for some guidance. We have internet access working via our ASA. We have lot of servers in our internal network with their apps/ services that make outbound connection requests to their respective vendor websites o...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-29-2025 08:17 AM | ||
| 08-26-2025 09:16 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM |
| User | Count |
|---|---|
| 8 | |
| 6 | |
| 5 | |
| 1 | |
| 1 |
