Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Good day!We have CSACSE-1113-k9 Cisco ACS 4.2 1113 appliance. And we need to reimage (restore the appliance to its original state). Could enyone help me with proper link to software.cisco.com image of recovery DVD?I'm trying to find it, but i cant se...

Hi, One of our sites has just upgraded to fibre broadband, the fibre box provided is a BTopenreach. I have configured an ASA 5505 with a Zyxel NBG5615 router. I have tested the router without the ASA which traffic works but when i add the ASA traffic...

ohgroup01 by Community Member
  • 948 Views
  • 3 replies
  • 0 Helpful votes

        [ Scanning] drop rate-1 exceeded. Current burst rate is 4 per second, max configured rate is 10; Current average rate is 7 per second, max configured rate is 5; Cumulative total count is 4424Hi team, I am using cisco ASA 5540.I have monitored...

Hello, I have a Cisco ASA 9.1(3) 5545 device. A request from my customer required that a few servers in DMZ be accessible from outside. The details are as follows: Servers in DMZ: 10.20.30.40-49Public IP used for static NAT: x.y.111.1 - 10 The DMZ in...

svchougule by Community Member
  • 822 Views
  • 3 replies
  • 0 Helpful votes

Resolved! ASA CX failover

We have a Pair of ASA 5515-X in active/passive failover, each with CX module.While the ASAs remain aligned to any changes in the configuration, it is not so for the CX module - that seems to be totally independent from each other and need to be confi...

battanc by Level 3
  • 1740 Views
  • 3 replies
  • 0 Helpful votes

Hi All,I've been doing a lot of research into whether or not you can assign multiple public IP addresses to the external interface of a Cisco ASA 5515-X appliance running v8.6. Can anyone confirm whether they have been able to achieve this?We are fac...

Harry2012 by Community Member
  • 1659 Views
  • 7 replies
  • 0 Helpful votes

Hi,I have 2 redundant ASA 5510  we had ISP1 configured on interface Ethernet 0/0  with interface name outside. We use this WAN ip to access portal in application server.This WAN ip (ISP1) is sometimes not stable so we configured new ISP WAN on Ethern...

fatahdirie by Community Member
  • 1775 Views
  • 13 replies
  • 0 Helpful votes

Hi All,Need your advise on procedure to rename ASA interface on live firewall.I have prepared a workplan to rename an interface on ASA 8.3 as below.Will there be any impact the existing live traffic going through the intrface?========================...

fadzila_h by Community Member
  • 9948 Views
  • 11 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card