Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

hi all,we have firewall with 2 interfaces: outside and inside. I would like to create a rule to allow 3.3.3.0/24 from outside to be able to access a server behind the firewall inside interface (from security level 0 to security level 100). I configur...

bindong.shi by Community Member
  • 1583 Views
  • 3 replies
  • 0 Helpful votes

Hi,I've to do NAT/PAT on ASA 5540 that's running 8.4 (x) verision. We have two interfaces, INSIDE and OUTSIDE.we want to NAT/PAT any traffic coming into INSIDE and going out from OUTSIDE interface and that traffic should be NAT'ed/PAT'ed to 10.10.1.0...

gavin han by Level 7
  • 1350 Views
  • 4 replies
  • 0 Helpful votes

I am setting up an ASA550 ver 7.2(3) - does this need upgrading?I have my ISP interfaces setup as primary and backupI have a static route pointing out:route primary 0.0.0.0 0.0.0.0 1.2.3.4 1Question:Do I put the next static route to beroute secondary...

I would like to ask a basic NAT question, please find the attached diagram, the firewall has 2 interfaces: Inside and outside. we have a web server hosted inside the firewall offerring web services to Internet users.The server private IP address is 1...

bindong.shi by Community Member
  • 2355 Views
  • 5 replies
  • 0 Helpful votes

We recently replaced our Cisco 5510 with a 5520. I had the SSL Client VPN working on the 5510, I cannot get it working on the 5520. The IOS version is 8.2(5) and the ASDM version is 6.4.I run through the SSL Client wizard and get everything set up. W...

I am having a issue getting my clients to connect to our network from home using the Cisco IPSec VPN client. On the ASA I have went through the VPN Wizard to set it up but when my clients connect they get connected but cannot ping anything on the net...

smicale32 by Community Member
  • 2580 Views
  • 5 replies
  • 0 Helpful votes

Is there a good discussion and example out there that explains how to convert your PIX configs to an ASA 8.X?I'm stuck on how to convert the following to our ASA environment:global (outside) 1 interfacenat (inside) 1 0.0.0.0 0.0.0.0 0 0nat (VPN) 1 10...

I got 2 x 5520 ASAs configured in active/standby mode and they are connected to 2 x 4500 switches in which too configured for failover.Telnet to ASAs is allowed only via subnet 172.18.0.0./24I can only ping and telnet to the active ASA from subnet 17...

Hi everyone, Im sorry if this question has been posted million times ago but i wasn't able to find it here from a fast search i did.  Its a really simple question but im new to this field and i couldn't find any info regarding this either.  I must cr...

cisco4inform by Community Member
  • 1347 Views
  • 3 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card