Network Security

Hi Folkscan i have on asa 5510 multiple pools and multiple group authentication for various departments along with restricted access if anythanks in advance

Hi Folkswhen u use the debug cryoto isakmp 127 on the asa 5510, in order to troubleshhot remote access vpn users,to which entry r u looking in the debug to see if the user enter wrong password?thanks

Dear All,I've ASA5520 with CSC bundle, it's working fine. but i've some doubt on below output#SHOW INTERFACE IP BRIEFInternal-Control0/0        127.0.1.1       YES unset  up                    up  Internal-Data0/0           unassigned      YES unset ...

Hi FolksHow to designate access-list for the remote access vpn users in order to let them access specific subnet or host,asa 5510 and acs is in the picture

Hi,I'm new to firewall using ASA 5510. I am wondering can somebody point me to the right direction on how can I have a redundancy over two ASA 5510. Hardware load balancing and IP Load balancing, just like HSRP or GLBP. Below is my diagram.  ----- IN...

Hireally simply question where are the changes to the default pages stored. I cant see anything in the running config. So I am wondering are there some hidden files in which these customised pages are stored?  Any suggestions.RegardsChris M.

I upgraded my ASA 5510 this weekend from 8.2(1) to 8.4(1), ASDM 6.2(1) to 6.4(1). Everything is working correctly, but the ASDM is showing some odd information.Notice the upper right corner. Before, if I remember correctly, it used to show me my othe...

Hello everyone,I have two box cisco asa 5550 in multiple context mode and failover.My network topology is:                               Outside Network                                         •                                         •              ...

We have setup the IP phone proxy on our ASA-5520, we had a couple of issues with the initial setup, but nothing major. It has been up and running for a few weeks and basically everything works perfectly just like we designed it except for 1 strange a...

I'm trying to set up the AIP-SSM-10 card in my ASA 5510 at my DR site. I have setup the inspection policy and ACLs to redirect traffic to the AIP-SSM from my ASA. When I do a show access-list my hit count is growing. This tells me that my ASA is send...

Hi,We are testing a Zone Based FW config since 1month, everything run smooth but we're having problem ( big slow speed access ) when a user try to reach a website on a non-standard port ( 8080 in that case ). All the trafic stay in our LAN, using a I...

Hi,I need to change the ip addresses of quite a few named network object hosts. None of the rules associated with these will be changing so using the command line if just re-create the named object with the new ip should this do the trick?ThanksDarre...