Hello Team, I have a Cisco FPR-1010 running ASA software on it I am having trouble configuring SNMP to work with my SNMP collector neverthless I have all my Cisco ASA appliance working with same SNMP settings please let me know if there is something ...
Forum Posts
DearsPlease reply me with your experienceif i m not on a public cloud and completely on premises setup then any organization would require a virtual firewall in ESXI host ?? i think it is not required becz lets assume the vm on the esxi host all are...
We have two cisco asa 5510's in a failover setup.I'd like to take the secondary/failover and make it the primary/active and do this for good..not just for testing. And of course make the other the new secondary/failover.What would be the best way of ...
I'm trying to understand this order of operation. Port 22 and 3389 are being permitted by this line in my ACL and affecting traffic from the Outside zone to Inside zone. I imagine there are others, but this is where I am testing at the moment. ...
The timeout setting for a VPN group is 1 minute.vpn-idle-timeout 1However, even after one minute, the VPN will never be disconnected.What configuration do need?
Resolved! ASA 5525 End-of-Life date confusion
Hi,I read a few EoL notices regarding ASA5525:https://www.cisco.com/c/en/us/products/collateral/security/asa-firepower-services/eos-eol-notice-c51-743545.htmlhttps://www.cisco.com/c/en/us/products/collateral/security/asa-firepower-services/asa5525-55...
Resolved! Cisco Umbrella License Consumption
Let 's say we have Cisco DNS Advantage license for 100 users. Scenario 1: NO VA appliance is deployed. NO AD Integration .All DNS queries are forwared by Organisation DNS server to CISCO umbrella and there is PAT device at the edge. Querry is , how C...
I have an HA pair of FTD 2140 firewalls, running 7.0.1. They are managed by an FMC running 7.0.4. The firewall is running BGP with its upstream and downstream neighbors. I would like to enable BFD between the HA firewall and the upstream and downstre...
We are deploying 2110 FTD's for L2L connectivity and had a question on the best cabling setup. Our current Internet and DMZ switches are stacked which we are moving away from this setup. What would be the best cabling setup to remove any SPOF with tw...
Resolved! Cisco ASA 5555 IDS Features
I have an ASA 5555 running version 9.8 and ASDM 7.8(2). I am looking to see if anyone can point me to any firewall features on the ASA that resemble IDS functionality. Because I have zones enabled on the firewall, thread detection is disabled. Other ...
Added SSL inspection policy and it works as desired. The issue is that Chrome does not like the FMC cert and will not allow me to access any HTTPS sites because the sites are re-encrypted with my FMC Cert. Has anyone else encountered this issue? -W...
I have a layer 3 switch (Cisco Catalyst 3560) with multiple vlans configured on it, and connect to this switch to the inside interface of ASA 5510 (default VLAN IP) All vlan have L3 interface with IP address, and for the clients the default gateway i...
Hello,I would like to ask if the license for the FMC vmware is perpetual or i have to renew it every year?ThanksIoannis Gerokostas
Hi, I am in the process of setting up a pair of FTD 2130 (HA). These are replacing our ASA's.FTD2130 purely used for Cisco AnyConnect. All my profiles are in place and remote AC connection works well. I am stuck on loading SBL Modules. I've followed ...
Hello i have HA FW CISCO 1010 ..so i want to upgrade the two FW active passive with FMC 4000. yesterday , the update is performed only on the FW2 but the upgarde is not performed in FW1 !!!? FW2 will be 70.4 but FW1 is still 6.6.1 ...
