Network Security

I'm having a bit of difficulty. In my scenario the following is nvolved: 2 firewalls: "Inside" firewall: 2 VLANs (including the transit VLAN between the 2 firewalls). "Outside" firewall: 2 VLANs (including the Transit VLAN:Inside VLAN 1111 Transit VL...

I have about 30 IPS/IDS/IPSM/IDSM's that have been stable for a long time but for some reason the last few months I've seen a lot of analysys engines stopping. This sometimes happens around the time I am updating signature pushes, but it also appears...

Hi All,Our company has just installed two Audio Video Servers(AVS), both of these machines are behind a Cisco ASA 5505. The problem is that when the servers are behind the f/w the sessions are not getting initiated. We have opened the following ports...

Hi,I had configured a CAM 4.5 with CAS 3310.After authenticated successfully through Web agent, the page redirected to authenticate session again. Is there any option need I to change? Thank you.

Hi,Understand that AIP-SSM doesn't support email alert, may i know what are the alert option that I can configure in order to receive notification when a severity 1 event had been detected?regards

Hello,I have 4 security zones defined on my 2611XM - 12.4.15T8 router. The customer defined its security policy as a destination policy to all 4 zones, egfrom 10 hosts/networks to zone1from 20 hosts/networks to zone2, etc,where the hosts/networks are...

Im using a RVS4000 SOHO 4 port Giga_ethernet router.I'm trying to set the firewall to work with different policies. But this seems impossible.There are normally 10 policies available.What I try to do is give two PCs different access to teh web at dif...

Hello, Customers having IPS 4215 version 6.0(5)E3 are having their sensor crashing following auto update from an FTP server.The web interface is no more accessible and the analysis engine stopped( I've attached the show tech-support)The problem happe...

I wonder if anyone can help me please. I am setting up vpn tunnels between my site and 3 other sites (there is no connectivity required between these 3 sites).I am using a Cisco 7301 as my endpoint and have a single IP address that all three sites ha...

How I can configure IDSM2 in Inline mode in a Router 7600

I've been logging what is very obviously an attack directed at some of my dns servers. My router/IDS has logged hundreds of thousands of these requests in the last 7 days. The router is reporting the following events in my syslog which is what initia...

I have CAM and CAS failover bundle. 2 CAM and 2 CAS. I am purchasing a third-party Trusted CA. How many certificates will I need to purchase? Do I need 1 cert for all the servers, 1 per F/O bundle, or 1 cert per server?And can I use a private IP to g...

Running ASA v8.x. I'm trying to save the run to a TFTP server that's connected via a VPN tunnel. I have "management-interface inside" set up so I can get remote access via ASDM, but I'm not sure how to get TFTP to work. I defined the tftp client in c...