Network Security

I'm trying to set the VPN Key Management to DH 5 on ASA 5510. The VPN client is not able anymore to set up the VPN connection. When using DH 2, everything works ok.. Does the client not support DH Group 5 ?

I set up a Cisco ASA 5505 for remote access, and a point to point to a collocation facility. Recently local lan access was not working so I configured the split tunnel access list. Local Lan access now works but when connected to the vpnI still can...

I am trying to configure my PIX-535 to prompt for RSA Secure ID authentication.So when somebody tries to get to a paticular website, the PIX-535 will put up a Secure ID page and forward the response to our RSA Secure ID server.Any help?

I have a pix501 with configuration unknown to me. I exectued the standard password recovery procedure. Although during the procedure I was informed that the password and any aaa configuration were reset (and even I was prompted to agree to delete the...

I recently upgraded my IDSM-2 to 6.1. It resides in a 7609 running 12.2(18)SXF8. Mode is just as a sensor (promiscous) and does not block. All the VLANs in the 7609 are spanned to the sensor port.Since upgrading to 6.1 and monitoring with the IME ...

Hi,I have two servers: one in a DMZ (actually, it's not a real DMZ, just another lan with a security level lower than inside, but it does not accept connections from internet).I'd like to have a batch on the DMZ server which does a xcopy myfile.txt \...

Is there a document on CCO that compares Cisco NAC solution with 802.1X-based solutions?Specifically: NAC use Cisco Clean Access Agent (CAA). What value (if any) does Cisco Trust Agent (CTA) and/or Cisco Secure Services Client (SSC) add? I hear that ...

what is the use of having multiple firewall vlan-group in fwsm?thanks

Hi all,I am a newbie for cisco pics and I wanted to add abasic NAT rule to my firewall to allow and redirect FTP requests from internet to one of my public adresses194.250.0.50 to an internal computer 190.100.100.102.using the web interface I added o...

Hi,Does the ASA 5550 and the ASA 5580 series support the CSC or AIP moduls?Thanks.Sonu.

Hi,Would like to take access on ASA from the public network via ssh.What should be the config of my asa.Is there any command to connect to the my device as that we use telnet <ip address of the device>.How to access the device using device from clien...

Dear ALL,I'd like to know if is there a CISCO firewall able to perform layer application filtering task, like protection from cross site scripting and sql injections. Regards Alberto Brivio

Has anyone has any problems with the mounting brackets that they send with the ASA? I have a 5520 with one of those T looking bracets. When you install the devices facing the front, the part where it looks like a T extend beyond the device and does...