Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi All,i have a little problem with subj. I have ASA 5505 7.2 and PIX 6.3(5). The Pix make IPSec connection to ASA, but lost the connection approx 20 hours, and tryed to reconnect.In logging on the asa i can see that asa dont clear ipsec session for ...

AK_1999 by Level 1
  • 515 Views
  • 3 replies
  • 0 Helpful votes

I installed a new ASA 5520 for a client that hosts websites over the weekend. The client has a POP3 server which their clients use to send emails out of the internet. One of the clients is having intermittent issues doing this from a scanner that s...

deyster94 by Level 5
  • 1036 Views
  • 2 replies
  • 0 Helpful votes

Here is what im trying to do. I have a Web server on the DMZ and this is what I?m looking to do. A. Allow DMZ Web server to communicate with my SQL on the internal network using port 1433B. Allow my SUS server on the DMZ to have internet access so t...

nocret808 by Level 1
  • 532 Views
  • 2 replies
  • 0 Helpful votes

Hello,We have two PIX515E(failover via serial cable). Ever since we physically relocated the two firewalls, it's been failing over to secondary then back to primary. It happened three times within a span of three months. I verified that there was no ...

All,I have two ASA 5510 with 7.06 sowftware (Security Plus licence), this is the original image the device came with it. When I upgrade to 7.22 the sh ver output says Failover suppport Acitve/Active,while the original image supports Active/Standby an...

I have an ASA5510....the cust want smtp to be translated to the outside interface IP (x.x.x.218)going out......but wants incoming mail to go to the next ip in their public range(x.x.x.219)is this possiblethanks

I have an IPSEC tunnel between a remote site (1720 with IOS Firewall v12.1(1)) and Corporate headquarters (PIX 515 v6.1.(1)) and it terminates on the Pix outside interface. Our Exchange 5.5 server is located on the inside LAN of the PIX. When email...

r-remien by Level 1
  • 2923 Views
  • 11 replies
  • 0 Helpful votes

Hi,We just design a wireless network and integrated with NAC appliance :1. My customer have campus A & campus B, these 2 campus connected with 100Mbps FTTB link, these 2 campus are in different Layer 2 domain.2. Both campus A & B have thin APs, but o...

I have IDS4215 and do not have password from previous guy, how can i reset the password for my IDS4215 and even i am new to this field. Help from someone will be highly appreciated...Thanks in advance