has anybody familiar with PPTP/gre? Here is my scenario:NT 4 inside-PIX-outside--internet --PCNT4 has PPTP server(MS built in) running inside the pIX. PCs over the internet are able to establish GRE tunnel. We allow PPTP/GRE por...
has anybody familiar with PPTP/gre? Here is my scenario:NT 4 inside-PIX-outside--internet --PCNT4 has PPTP server(MS built in) running inside the pIX. PCs over the internet are able to establish GRE tunnel. We allow PPTP/GRE por...
How can i define the internal networks for IDS 5.X? Thank you
Does anyone know if the ASA 5500 has support for Jumbo frames?
How to avoid duplicate IP address alerts from devices with HSRP and virtual IP configuration?
I am trying to get 2 ASA's to failover in the lab but Im not having any success:kentasa1# sho failFailover OnFailover unit PrimaryFailover LAN Interface: failover GigabitEthernet0/3.1 (Failed - No Switchover)Unit Poll frequency 1 seconds, holdtime 15...
Dear Pros,Please let me know the IPS placement for the following network scenarios i am implementing for my customer-DSL internet connection terminated in Cisco 3825 internet router.-3825 inside ethernet segmemt goes to PIX failover pair outside segm...
Hello All,I have a PIX 525 configured with 3 interfaces (inside,outside,DMZ). This PIX is connected to a cisco core 4100R switch. I want to let a specific VLAN with a subnet (10.2.0.0) to remote desktop and ping the DMZ web and mail servers. However,...
I am wading into the art of rule creation in MARS. I wrote a rule and it doesn't seem to work. Then I took everything out of the rule such that it is "any" all the way across. Then I ran an "any" query using this "any" rule and I get no results bu...
I've setup an ASA to allow SNMP polling from a monitoring host internally. I fired up an SNMP browser to see what kinds of information I could get, and tried to look at the supported MIBS that Cisco lists.What I really want to get is the bandwidth ut...
I am reading the user guide on how to enable the "real time event viewer" query type but the radio button for it is greyed out. Any thoughts on that?
How can I route two ADSL?s from the pix? Each ADSL is in a different PIX interface, each ADSL is offering internet sevices, but I can only set one default route in the pix, so the responses from my server goes out for the same ADSL (the default rout...
Hi,I was wondering whether there is a way to tell the firewall to display the IP addresses of hosts and networks rather than the names that have been configured with the names command when I do a show run.The obvious problem I have is when I want to ...
HiSomeone please help me,i need to upgrade to a 3DES/aes license, i found pix firewall license free at this link https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet,in title it says that it is for Cisco PIX Security Appliance 3DES/AES ...
Seeing alot of activity with regard to this new vulnerability. The sensor is denying packets. The html is usually in the "Context" of the packet. Has anyone seen false positives for this signature?<html xmlns:v="urn:schemas-microsoft-com:vm
Dear Pros,Today I started to configured 2 IPS 4240 sensors. Each one has 4 sniffing inteerfaces.I want to configure the sensor in in line mode not as IDS mode. I have th network with multible vlans.PIX in failover mode with inside zone connected to t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 01-21-2026 03:34 PM | ||
| 01-21-2026 11:24 AM | ||
| 01-20-2026 01:44 PM | ||
| 12-31-2025 01:53 AM | ||
| 12-15-2025 09:32 PM |
| User | Count |
|---|---|
| 4 | |
| 4 | |
| 3 | |
| 2 | |
| 1 |