ASA HA documentation states a 16 route table limit for Azure HA setups. That's a super tight limit for even an average size Azure estate. Are there any plans to increase that cap in the near future?
ASA HA documentation states a 16 route table limit for Azure HA setups. That's a super tight limit for even an average size Azure estate. Are there any plans to increase that cap in the near future?
hello, I have an ASA with 3 interfaces configuredINSIDE ( 10.40.1.0) on Gi/2OUTSIDE ( 10.0.0.0) on Gi/1BIO ( 10.0.2.0) on Gi/3Interface 3 was added by me.I want INSIDE and BIO to communicate in FTP and ICMP in both directions. The ASA already had an ...
I know that Cisco Secure Firewall ISA3000 supports OT protocols, like MMS, modbus, DNP3. Does other series of Firepower appliances (1000, 2100, 4100 etc) also support these OT protocols?Is there a tool or document where we can find the protocols disc...
We are using FMC 6.7.0.2 and ASAs with FTD 6.7.0.2.I'm looking for help on the right way to allow outbound access to trusted URLs. I had been attempting this using an access control policy rule, and then under URL's, adding to the Selected URLs li...
i, I appreciate any help you can provide on this one. We have a Cisco ASA 5545 running 9.8(4)29 and have a client VPN configured using the local Client Address Pool to provide IPs to users. We are having some issues with one of our user identity piec...
Dear All,I have setup Full tunnels VPN access on a ASA 5515 but cannot access the host or ASA when I login using the VPN. I can connect with the Cisco VPN ,I have access to internet and I can use ssh using either ISP address or local ip address . Th...
Hello I have aslo other ASA 5506-X V05 i and have a problem about install and upgrade . Problem : i try more time but i have the message error . firepower-boot>system install noconfirm ftp://192.168.1.254/ftd-6.2.3-83.pkg######################## WA...
Hello we have firewall ASA5506-X Cisco .Problem : reboot tentative and console putty is black ... .nothing to display in the putty. so i need to know what's the problem !!! and what's the solution ?? i wait a reply from expert Security FW ASA Cis...
I'm at a loss here. Apparently they don't want me to post my issue as it keeps kicking me back saying I'm posting private/personally identifying information that I'm not....Simply put FMC isn't accepting the devices so can't use it to migrate. Do I n...
We enabled logging on a Firepower 4100 with ASA software but I would like to only log hits on inbound rules. Outbound rules are not interesting in my case because this traffic is logged on other firewalls. This way we receive close to 300GB of logs p...
Dears, I have an FTD that have 3 Interfaces (Inside, Outside and DMZ). This FTD should be implemented in transparent mode and Only-IPS should be applicable. As per cisco documents, in transparent mode we must create Inline Set between interfaces to b...
Hi All, Just the other day I created an outgoing ACL on my OUTSIDE interface on the ASA. The source is a couple of internal servers which I need to deny internet access to. The servers will have to exit other interfaces on the ASA so I thought that i...
I'm working to validate the speeds through our Firepower 2110 & 2120 devices (running 7.0.1 snort3). We recently bumped the speed on our internet connection to 1gig, but these two devices don't seem to be able to handle the throughput. As it stands,...
Hello! We have a very old Cisco Access Control System (ACS) Appliance, I believe the software version is 3.3. A couple of years ago we were supposed to replace it but we didn't do it. Now, we are looking to replace it and I want to know if the latest...
I'm posting the post once again as previous status shows for some reason as solved, I believe somebody could spoof me somehow, and I can't revoke it now.I just wander is somebody could help me. I'm trying to set different DNS server per each DHCP poo...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-12-2025 06:02 AM | ||
06-11-2025 07:59 AM | ||
06-11-2025 06:59 AM | ||
06-10-2025 06:12 AM | ||
06-09-2025 10:23 AM |
User | Count |
---|---|
6 | |
3 | |
2 | |
2 | |
2 |