Network Security

I am trying to change static command in pix 520.Currently, I have it set for (static inside, outside 172.16.1.0 172.16.1.0 netmask 255.255.255.0 0 0)This is going to allow 172.16.1.0 network.However, I am running out of 172.16.1.0 network IP.So I hav...

How can I allow all traffic from two DMZ interfaces of my 525 PIX to the inside interface of the PIX and then back from the inside interface to each DMZ? I think I have all of the traffic from the inside to the DMZs working ok but I need to open all...

is it possible to establish a failover between the pix515 FW and the checkpoint FWI? if yes How? Thanks

I'm trying to establish a W2K pro PPTP tunnel through a PIX out to an external Multi-homed W2K server (across public internet). When I initiate the client (secure side of PIX) it contacts the external server and begins to authenticate but eventually...

Can Stateful Failover be done WITHOUT the serial failover cable on a PIX with version 6.0? If so how?If not, has anyone extended the cable using a modem, CSU/DSU, or line driver? If so how please be specific (Products used and configuration used)? Th...

Hi All , My client is looking for a software , similar to the ones with Swithch , know the Switch manager , the GUI provided by cisco where you can manage and easily configure the switch .. may that be a 2900 or a 3500 series switch .The same way ,...

outside |PIX --inside - database server |DMZ |Web ServerI can't get the Web Server to communicate with the database server. I can http to the web server from inside,outside. I can http from DMZ to outside. Any ideas?

I have a PIX firewall with registered DNS. The problem is that internal users use the same DNS that the outside world uses. If I put the records on the DNS as unreal IP for the servers, inside user would have no problem but the ouside world will star...

I want config the pix 506 without nat.

I currently have a dmz with FW1 (inherited) which is going away. I also have a new application that needs a dmz and I need to look at alternatives. Traffic from the internet into the dmz needs to be limited by uname/passwd and will be about 100 hit...

I can not seem to receive a Certificate from an Enterprise CA from MS. If a standalone CA is used, I can issue the Certificate. Is it possible for the PIX 506 to receive a certificate from an enterprise CA, and if so, How?

Is there such a thing. I am buying one so that I can lurn the pix. Is this a hoax? The frount door says Local Dir. I have not seen the sh ver yet. If I do, what shoud I look for in a ? Combo ?ThanksPhil

Hi, I have been having problems configuring a pix for a customers site and was wondering if anybody might be able to help. I have written down as much info below as possible but please tell me if you need any more. Any help is greatly appreciated.c...

Hi Folks,Quick diagram:internet -- cable modem -- pix 520 -- unmanaged hubI'm having trouble getting out from the inside lan with a PIX 520 connecting to a cable modem using PAT.Here's my config:PIX Version 6.0(1)nameif ethernet0 outside security0nam...

Does anyone now if Cisco PIX is CVP compatible?And what is CVP?Reason I'm asking is because I've been looking at Norton Antivirus for Firewall's. And it supports all CVP compatible firewalls.Thanks in advance,Oyvind