Hello,i am actually migrating my SSL-VPNs from a Cisco ASA 5508-X to a Cisco vASA.My issue: VPN Connections are established but not using the configured GPOs > Uses DfltGrpPolicy.Group Policies should be matched via the returned "Class-Attribute" lik...
Forum Posts
i have an issue but im not sure if its an issue or not ? which is all interfaces security level are 0 and according to my below configuration i have inside and outside and both zero sec level as below :interface GigabitEthernet1/1nameif outsidects ma...
Resolved! Interface query
I have an DMZ network which has 10 DMZ interfaces from DMZ1 to DMZ 10.I want to packet capture for an ip address in DMZ network.[10.10.x.x]I want to do a packet capture but am not sure through which interface my traffic is flowing.is there any way to...
Hi all, when logging in from the ASDM to the Cisco ASA 5506-X I see the following error on the Java console, and it remains forever loading (after entering the username and password): Using JRE version 1.8.0_231 Java HotSpot(TM) Client VMUser home di...
guys..what is the recommended syslog configuration if i want to send all logs to azure sentinel?i mean do i need to include the uplinks in the command? eg below:-logging facility sysloglogging source-interface "uplink-ports"logging host "ip add of sy...
In a FPR Clustered Deployment Scenario due to the performance issues you're not supposed to do the NAT over the firewall clusterSources:BRKSEC-3032 and CCNP Security SNCF 300-710 if we decide to do the recommendation here, and do the NAT on an ASR-9...
Why is Network Discovery Only default on FMC and not Block All Traffic?
Resolved! Cisco FMC 1600 Reimage Methods
Hi All, Can I reimage Cisco FMC 1600 series appliance through LOM console ? Thanks,Rajesh.
Does anyone have a tested, validated, and trustworthy migration procedure to convert an FDM-managed FTD appliance to being managed by FMC? My FMCv is located in AWS. FTD doesn't support management over VPN easily, if at all. I can only manage my FTD...
Resolved! ASA FirePOWER Module Push Vs Install
hi, i'm trying to patch my ASA 5506 FP module via ASDM. tried searching for the difference between update 'push' and 'install' but my google skills failing me. see attached screenshot. can also advice what's difference between the two or give me a he...
Certain logs are not displayed properly in asa.We sent a particular udp packet 5 times.However, it is not seen in the asa log or only one is shown.What's the matter?
I can VPN to local LAN through PIX 510 Firewall. The inside gateway address on PDC is 000.000.20.12 which is the inside address of PIX. On the LAN there is a BDC com server that is using 000.000.20.1 gateway through a Cisco 3600 Router to the company...
Hi, everybody. Faced with such a problem. (which probably occurred after the DC update) FMC1500Software Version 6.3.0.4 (build 44)OS Cisco Fire Linux OS 6.3.0 (build21) No user activity in Analysis -> User -> User Activity. I am using Cisco Firepowe...
HI All, How do I keep current intrusion policy configuration when I update snort rules?Could someone help me? Best Regards,Nicholas
I have an ASA running sourcefire. Recently I noticed that the sourcefire module is showing as unresponsive and not functioning properly. After logging into the system I noticed that /var is 100% full. However if I run the following command "sudo d...
