Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am attempting to register an AIR-CAP1602I-A-K9 with C1600 Software (AP1G2-K9W8-M), Version 15.3(3)JF14 to a 5508 WLC running 8.5.140.0. The AP is getting the option 43 of the WLC correctly and is seeing it. However, when it attempt to register I ge...
On a Firepower 4140, if you already have a single native instance of an FTD running on the chassis, is it possible to add container instances after that? or would you have to delete the native instance and start over?Thank you.
Dear Community,I am reading that in a wireless polar plot that the outermost circle represents the stronger signal strengths while the innermost circles represent the weaker signal strengths. This seems counterintuitive as the futher you get away fro...
Dear Community,I am in need of some assistance. I have a 2921 router here that is (or was) being used as a VG of some kind. However, nobody is really sure if it is still being used for anything. It looks like it may have some CME and SRST functionali...
Community,I am facing a very interesting and strange Topology Change issue with Rapid spanning tree. Here is what I am noticing. On the Catalyst 9300-48P (17.6.3), I am seeing some port flapping on ports connected to AP's. These ports are configured ...
Rasika,Thank you for this. So the polar plot is a means of comparing the signal strength of different radiation patterns of different APs from an E-Plane and H-Plane perspective?
Thank you so much everyone for your astute observations and suggestions. I will see what I can do from a CUCM perspective and update later. Thanks again everyone!
I believe I found the issue. The switchports are in trunk mode and thus are missing the "trunk" keyword. SW03#show spanning-tree int g1/0/47 portfastVLAN0255 disabledVLAN0401 disabledVLAN0402 disabledVLAN0403 disabledIf I do spanning-tree portfast tr...