I learning how to set-up firewall and came accross such a problem when trying to connect through web-browser to DMZSERV : 3. The packet is coming from an outside network. The device looks up its NAT table for necessary translations. 4. The packet is ...
Forum Posts
Hello Folks, I have a pair of ASA5516 with HA mode, ISP provides a high-speed WAN 500Mbps up/download, while doing some speed tests recently we noticed that all our tests from the inside network are not bypassing 100mbps, I checked all inside/outside...
Hello all, I would like to get some help how to How to expend existing disk space of cisco vFMC. For example, i have 2500 GB disk at existing fmc, then i want to get increase 300 GB. I did increase at vm level to 300 GB, and i check "df -h" command i...
During the FTD HA upgrade from FMC, if first standby is failed /corrupted during the upgrade ,will FMC will try to upgrade other devices in the failover pair or will abort the upgrade?.
I have a new isp on a 2nd outside interface. I would like to send all traffic from one ip range and only that range out over the new ISP.Currently Here is what I haveinterface GigabitEthernet1/1nameif Outsidesecurity-level 0ip address a.a.a.a 255.255...
hi Cisco,I am using below topology in my lab where ASA in multiple context - C1 and C2 sharing the same physical interface, in different VLANs (sub interface) is not able to establish EIGRP neighborship with 2 cisco routers (point to point). Although...
Hi All,Need your suggestion is fixing the login to ASDM. Getting Login Failed error even the same password works for SSH and also to download the launcher from https://ipaddress/admin. But when i login from ASDM getting Login failed error.I went thro...
Situation:-Server Will have a private IP natted with a public IP from firewallFirewall outside interface will have a public IP of same poolAll incoming traffic on outside interface from internet will be blocked on firewall and only Client IP address ...
After upgrading ASA to version 9.18.4 we are seeing Azure Traffic Manager probes being dropped (or discarded). In the logs we see 'TCP access denied by ACL from <traffic manager IP> to Outside Interface /443' It works fine when reverting back to 9.16...
HiI have created the VTI Interface for this but when I run packet tracer input the VTI I nterface is not in the list of available interfaces to use in packet tracer.??Any ideas anyone Thanks
Resolved! Backing up config, FTD and vFMC.
Hi. I am most of the way through implementing an ASA 5508-x, controlled by a vFMC. Both are running 6.2.2.0 of the FTD and FMC software. Since the configuration is quite complex, and I would hate to have to do it all again from scratch, I figured...
Resolved! Simulate DoS Attack in CML
Hallo,Is there a way to simulate a DoS attack in CML? I am doing a lab on CoPP and an attack is required but I am unable to generate this. Thanks.
Hello everybody, I have a Cisco 2911 that is Certificate Authority for various end hosts, and that deliver certificates to them. I would like to monitor the validity dates of the certificates by SNMP requests. I found this MIB that looked usefull ...
I am trying to upgrade the firmware on ASA's we have at multiple sites but for some reason copying over the firmware fails. We are currently running FP2140's in ASA mode and whenever I copy the files over from a windows machine, it fails. I am using ...
Resolved! upgrade process of firepower 2130
hello We have a old fire power that I have no idea how to upgrade. The actual device is a Cisco Firepower 2130 Threat Defense (77) Version 7.0.4 . Cisco Adaptive Security Appliance Software Version 9.16(3)18. and we have a FMC that is Cisco Firepower...
