NDFC resource tab vlan range

[Deepak Bansal]

Hi Experts,

Im deploying NDFC for greenfield network. In resource tab its asking below, i don't know what this will be used for , should i keep it default value or I need to put some vlan and need to reserve it .

* Network VLAN Range
Per Switch Overlay Network VLAN Range (Min:2, Max:3967)

* VRF VLAN Range
Per Switch Overlay VRF VLAN Range (Min:2, Max:3967)

and

* Subinterface Dot1q Range
Per Border Dot1q Range For VRF Lite Connectivity (Min:2, Max:4093)

 Please share your valuable comments and recommendation.

Thanks

[balaji.bandi]

Those are pre-requisites before you deploying NDFC (planning)

check below guides :

https://www.cisco.com/c/en/us/td/docs/dcn/whitepapers/cisco-nexus-dashboard-fabric-controller-deployment-guide.html

https://www.ciscolive.com/c/dam/r/ciscolive/global-event/docs/2022/pdf/BRKDCN-1119.pdf

check pre-requisites :

https://www.cisco.com/c/en/us/td/docs/dcn/ndfc/1212/installation/cisco-ndfc-install-and-upgrade-guide-1212/prerequisites.html

Guide explains you about resource tab :

https://www.cisco.com/c/en/us/td/docs/dcn/ndfc/1201/configuration/fabric-controller/cisco-ndfc-fabric-controller-configuration-guide-1201/fabrics.html#concept_znx_djb_yfb__section_mr2_ll2_bxb

[Deepak Bansal]

Thanks Balaji for sharing all documents.

document doesn’t Tak about recommendations or best practice. For example 

Network VLAN Range
Per Switch Overlay Network VLAN Range (Min:2, Max:3967)

it sound like L2 vlan range and I believe all vlan from 2 to 3967 should be in switches right. Those fields are auto populated based upon Cisco best practice. These things are missing in document.

hope it’s making sense. 

appreciate your help here