ISL Fibre Transceiver for Cisco Nexus 9000 (N9k-C9372TX)

[utawakevou]

I'll need to have an inter switch link between Cisco Nexus 9000 (N9k-C9372TX) to another campus where I have a Aruba JL075A 3810M-16SFP+-2-slot switch using a 1000LX J4859C transceiver and single mode fibre.

Anyone know if this can work? If so, what type of transceiver would I need for the Cisco Nexus 9000 (N9k-C9372TX)?

[utawakevou · Accepted solution]

A couple more reading and researching, I believe this can be achieved using the following transceiver on the Cisco Nexus 9000 (N9k-C9372TX) and the Aruba JL075A 3810M-16SFP+-2-slot switch:

• Cisco 40GBASE-LR4, 1310 nm, SMF with OTU3 data-rate support ( https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-660083.html
• Aruba 10G SFP+ LC LR 10km SMF Transceiver J9151E https://buy.hpe.com/us/en/options/transceivers/transceivers/networking-sfp-form-factor/aruba-10g-sfp-lc-lr-10km-smf-transceiver/p/j9151e