Nexus Devices

We are working on a Hyper Convergence Infrastructure project and our designated switch is a pair of N9K-C9336C-FX2 (version 10.2(5) MR) to host our HCI servers (Lenovo Think Agile VX7531 Certified Node).Current Nexus9000 C9372TX hosting our three-tie...

Hi, I'm currently working on a Nexus9000 C93108TC-FX and trying to measure the time it takes for the ports to start. During the experiments, I found that the ports sometimes take way longer to start. I was digging through the log files to find that w...

Weird issue result of ping test with two fabrics(vxlan+evpn) Hello guys, We have hit into some weird issue in our test topology , Can you guys help us to fix the issue? thanks. Test environments: We have build a test topology with two same fabrics(vx...

I'm running into an issue where I cannot access the Nexus 9000v after deploying it through an OVA on my standalone ESXi server (No vCenter). Without vCenter I'm not able to use the serial feature that Cisco outlines in their documentation to work aro...

Hello , is there any tool out there to convert the cisco nexus configuration to ios . Migrating from N7k to C9000 series . Thanks

show policy-map interface eth 1/2 output Global statistics status :   enabled NOTE: Type qos policy-map configured on VLAN will take precedence       over system-qos policy-map for traffic on the VLAN Ethernet1/2   Service-policy (queuing) output:   ...

Hi kind of new to switches in general.I have one switch that has a bunch of interfaces and policies configured on it. I would like a way to copy the exact interface from one switch to another. They are the same switches. I just dont want to do interf...

Hello all, Could Cisco and the NX-OS RESTCONF team, please finally update and support the final IETF RFC standard for RESTCONF Protocol within NX-OS? Thanks

Hello, My host_vars file as follows. -- loopbacks:- { interface: loopback0, addr: 30.30.30.30, mask: 32, tag: 54321 }- { interface: loopback1, addr: 10.200.200.22, mask: 32, tag: 54321 } --   Tasks file as follows.  name: CONFIGURE INTERFACE IP ADDRn...

Hello,I was wondering with vNX-OS can be utilized as switch connected to RYU controller.Based on the following excerpt of a document, it seems to be possible.I was wondering, if someone does have experience with this topic and where to find some more...

I have NX-OS 9.3(7) (in EVE-NG) device to whcih pyATS can connect and parse all commands except thsi one command:show bgp vrf all all neighborsThis command returns follwoing error:Issue with the parser show bgp vrf all all neighborsTraceback (most re...