08-16-2022 08:58 PM - edited 08-16-2022 09:01 PM
hello, team:
I am trying to test vxlan evp ebgp with dual AS, but I could not get nve peers up, if just use ibgp for spine and leefs, everything works fine. maybe someone could help and look from different view.
cisco reference
loopback routes from both leafs shown up in sp1, sp2, but from sp1, sp2 does not advertise those loopback routes to neighbor leafs, I thought that is related to allowas in and disable-peer-as-check, but it still failed, any suggestions?
thanks
~Mike
Solved! Go to Solution.
08-17-2022 12:54 PM
got it working, bgp address family is killing me, I would suggest to use exit-family instead.
LEAF1# show ip bgp all
BGP routing table information for VRF default, address family IPv4 Unicast
BGP table version is 41, Local Router ID is 10.255.255.1
Status: s-suppressed, x-deleted, S-stale, d-dampened, h-history, *-valid, >-best
Path type: i-internal, e-external, c-confed, l-local, a-aggregate, r-redist, I-injected
Origin codes: i - IGP, e - EGP, ? - incomplete, | - multipath, & - backup, 2 - best2
Network Next Hop Metric LocPrf Weight Path
*>r10.1.1.1/32 0.0.0.0 0 100 32768 ?
*>e10.1.1.2/32 10.255.255.4 0 65000 65001 ?
*>e10.1.1.4/32 10.255.255.4 0 0 65000 ?
*>r10.255.255.1/32 0.0.0.0 0 100 32768 ?
*>e10.255.255.2/32 10.255.255.4 0 65000 65001 ?
*>e10.255.255.4/32 10.255.255.4 0 0 65000 ?
BGP routing table information for VRF default, address family L2VPN EVPN
BGP table version is 33, Local Router ID is 10.255.255.1
Status: s-suppressed, x-deleted, S-stale, d-dampened, h-history, *-valid, >-best
Path type: i-internal, e-external, c-confed, l-local, a-aggregate, r-redist, I-injected
Origin codes: i - IGP, e - EGP, ? - incomplete, | - multipath, & - backup, 2 - best2
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 10.255.255.1:32777 (L2VNI 1000)
*>l[2]:[0]:[0]:[48]:[5254.0004.6eb4]:[0]:[0.0.0.0]/216
10.1.1.1 100 32768 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[0]:[0.0.0.0]/216
10.1.1.2 0 65000 65001 i
*>l[2]:[0]:[0]:[48]:[5254.0004.6eb4]:[32]:[192.168.1.2]/248
10.1.1.1 100 32768 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[32]:[192.168.1.4]/248
10.1.1.2 0 65000 65001 i
*>l[3]:[0]:[32]:[10.1.1.1]/88
10.1.1.1 100 32768 i
*>e[3]:[0]:[32]:[10.1.1.2]/88
10.1.1.2 0 65000 65001 i
Route Distinguisher: 10.255.255.2:32777
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[0]:[0.0.0.0]/216
10.1.1.2 0 65000 65001 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[32]:[192.168.1.4]/248
10.1.1.2 0 65000 65001 i
*>e[3]:[0]:[32]:[10.1.1.2]/88
10.1.1.2 0 65000 65001 i
LEAF1# show nve peers
Interface Peer-IP State LearnType Uptime Router-Mac
--------- -------------------------------------- ----- --------- -------- -----------------
nve1 10.1.1.2 Up CP 00:14:05 n/a
LEAF1#
08-16-2022 08:59 PM - edited 08-16-2022 09:00 PM
08-17-2022 12:54 PM
got it working, bgp address family is killing me, I would suggest to use exit-family instead.
LEAF1# show ip bgp all
BGP routing table information for VRF default, address family IPv4 Unicast
BGP table version is 41, Local Router ID is 10.255.255.1
Status: s-suppressed, x-deleted, S-stale, d-dampened, h-history, *-valid, >-best
Path type: i-internal, e-external, c-confed, l-local, a-aggregate, r-redist, I-injected
Origin codes: i - IGP, e - EGP, ? - incomplete, | - multipath, & - backup, 2 - best2
Network Next Hop Metric LocPrf Weight Path
*>r10.1.1.1/32 0.0.0.0 0 100 32768 ?
*>e10.1.1.2/32 10.255.255.4 0 65000 65001 ?
*>e10.1.1.4/32 10.255.255.4 0 0 65000 ?
*>r10.255.255.1/32 0.0.0.0 0 100 32768 ?
*>e10.255.255.2/32 10.255.255.4 0 65000 65001 ?
*>e10.255.255.4/32 10.255.255.4 0 0 65000 ?
BGP routing table information for VRF default, address family L2VPN EVPN
BGP table version is 33, Local Router ID is 10.255.255.1
Status: s-suppressed, x-deleted, S-stale, d-dampened, h-history, *-valid, >-best
Path type: i-internal, e-external, c-confed, l-local, a-aggregate, r-redist, I-injected
Origin codes: i - IGP, e - EGP, ? - incomplete, | - multipath, & - backup, 2 - best2
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 10.255.255.1:32777 (L2VNI 1000)
*>l[2]:[0]:[0]:[48]:[5254.0004.6eb4]:[0]:[0.0.0.0]/216
10.1.1.1 100 32768 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[0]:[0.0.0.0]/216
10.1.1.2 0 65000 65001 i
*>l[2]:[0]:[0]:[48]:[5254.0004.6eb4]:[32]:[192.168.1.2]/248
10.1.1.1 100 32768 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[32]:[192.168.1.4]/248
10.1.1.2 0 65000 65001 i
*>l[3]:[0]:[32]:[10.1.1.1]/88
10.1.1.1 100 32768 i
*>e[3]:[0]:[32]:[10.1.1.2]/88
10.1.1.2 0 65000 65001 i
Route Distinguisher: 10.255.255.2:32777
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[0]:[0.0.0.0]/216
10.1.1.2 0 65000 65001 i
*>e[2]:[0]:[0]:[48]:[5254.0013.cb6c]:[32]:[192.168.1.4]/248
10.1.1.2 0 65000 65001 i
*>e[3]:[0]:[32]:[10.1.1.2]/88
10.1.1.2 0 65000 65001 i
LEAF1# show nve peers
Interface Peer-IP State LearnType Uptime Router-Mac
--------- -------------------------------------- ----- --------- -------- -----------------
nve1 10.1.1.2 Up CP 00:14:05 n/a
LEAF1#
08-17-2022 01:33 PM
Thanks for Cisco devsandbox!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide