Nexus Devices

Hi experts,I have this Nexus 5596 chassis that doesn't support SLA configuration. I want to create a static route only if TCP on port 80 is open for another IP. I got the similar thing working on a Nexus 9K with a TCP-type SLA and a track and EEM tha...

Hi all, I’m trying to recover nexus 3K password according to this procedure. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/password_recovery/b_nx_os_pwr/nx_os_pw.html According to the guide, there will be two methods to do recovery pro...

Hi Everbody,We got a new N9336C-FX2 switch, configured it as a Layer-3 device, and used Subinterfaces in our configuration. Now we want to monitor the interface utilization via SNMP.The problem is with SNMP we always have the value of 0 for the Utili...

Hi all regarding the compatibility matrix https://www.cisco.com/c/dam/en/us/td/docs/Website/datacenter/fexmatrix/fexmatrix.html the old FEX N2K-C2248TP should work with C9336C-FX2. Unfortunately this FEX model is not available for provisioning. Will ...

Hello Cisco world,I'm currently troubleshooting a problem, where I want to see if specific packets (e.g. ICMP) are entering and/or leaving a specific switch ports. I used tcpdump (bash-4.2# tcpdump -i Eth1-2) via bash-shell, but all I see are rapid s...

Hello guys, I'm trying to configure FLEX Links on a C9372PX CISCO SWITCH, but when I try to add run the: feature flexlink command, nothing shows up. Are the cisco C9372PX able to use flex links for L1 backup and active ports or not?If not, is there a...

Hi, we have two Nexus C93180YC-FX3 working in vPC and they are constantly between 60-70% of memory usage. show system resourcesLoad average: 1 minute: 0.72 5 minutes: 0.80 15 minutes: 0.87Processes : 690 total, 1 runningCPU states : 3.77% user, 2.77%...

Hi All,I'm looking to configure a DCNM to send alarms to an API endpoint, I.E. post the alarm payload JSON formatted to an external url, in this case an AWS Lambda.  Instead of forwarding SNMP traffic, JSON format it and post it to an HTTPS URL.   Ca...

Hello, I have the switch nexus 5010. I haven't used the terminal to setup cisco switches. it's the first time with Cisco.Can i use and setup this switch via web interface? Thank you,Stefanos

Hi Community,   I have a connection that require jumbo frame. I configure both devices with attached configuration (lets say Sw-A and Sw-B):   Sw-A successfully to ping Sw-B with 8976 df-bit packet-size ( ping x.x.x.B df-bit packet-size 8976 source x...