On the ONS 15454, It is my understanding that circuits are built by referencing (among other things), the POS interface on the ML1000 card.
If the card has multiple POS interfaces like so
interface POS0
no ip address
spr interface-id 1
crc 32
!
interface POS1
no ip address
spr interface-id 1
crc 32
and there is a SPR interface that links up to bridge groups defined, how does one associate the bridge-groups with the POS interface is no bridge group is defined on the ML1000?
For instance:
bridge irb
bridge 32 protocol rstp
interface SPR1
no ip address
no keepalive
spr station-id 2
hold-queue 150 in
!
interface SPR1.32
description Extended Vlan 32
encapsulation dot1Q 32
no snmp trap link-status
bridge-group 32
interface POS0
no ip address
spr interface-id 1
crc 32
!
interface POS1
no ip address
spr interface-id 1
crc 32
Bridge 32 could connect to either POS interface yes? But nothing is specified under the POS config (this is a real config).
A little confused here--any advice would be great
