cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1941
Views
4
Helpful
4
Replies
Highlighted
Beginner

MCS-7835-H3 Hard Disk Led Amber Alarm

Hello Everybody,

I have a MCS-7835-H3 Server, running DMS 5.2.1. The Server has 4 hard disk, (300Gb every disk). I've noticed one hard disk is alarmed, the led is color amber.

I was looking for some documentation about this but i can't find anything.

I was looking at the applience and AAI interface for some information about the disks status and nothing... in the log files neither...

Can somebody helpme to know what is going on?

So many thanks!

IMG01054-20120306-1136.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Error light = replace. These things are pretty accurate, so if you have an error on the disk it will probably fail at some point if it hasn't already.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

4 REPLIES 4
Highlighted
Beginner

Hello,

This looks like hardware issue, maybe bad sectors, I would recommend opening a TAC case. They can run Hardware diagnostics on the drive to determine the exact cause of the alert - It may need a replacement.

Thanks,

Sagar Dhanrale

Highlighted

Thanks for your answer Sagar!

So, there is nothing that I can do for run some tests to the disk?

Thanks in advance

Highlighted

Error light = replace. These things are pretty accurate, so if you have an error on the disk it will probably fail at some point if it hasn't already.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

Highlighted

Thanks Aaron!

I will proceed to notify this and replace the disk!

Content for Community-Ad