Other Network Architecture Subjects

Hi I am having the same issue we have checked the power cable and tested it and it it is okay but still I am having same issue with power supply 1 nvironmental alarms:system minor alarm on power-supply 1 power-output-fail (raised 1d00h ago) backpl...

Good Morning All, I have SG500X series  with SFP-10G-SR and SF350 Series switch with MGBSX1 module. How can i connect both switch through patch cable.

Hi, I need some nat-pt v6 to v4  configuration in this topology. I am using newest pkt. ( 6.3.0 ) question. how to configuration when External_host to pingv6 external  another v4 address host  , the source address is transform to Branch1-RT's Fa0/0...

Greetings! Im trying to establish a wifi-bridge with 2 APs for same days now. The APs Model is AP 1532E-UXK9. One of em is configured as the root-ap which the WGB is supposed to associate with. It worked the first time i tested it with this guide ...

Hi all, what cable should I replace for cable 10GB (37-0961-03)? Can I use SFP-H10GB-CU5M for this?  Thanks,

i bought a new 1900 series router and when i type the enable command it says % no password set and i have tried to reset the password with ROMMON mode using CTRL +Break key but i haven't break to rommon mode plaese any idea

Can we settle old corrupted offline credit card batches or decode our 2950 catalyst 12 port server logs we have old hardware-  1    catalyst 2950 series 12 port                                       &   1        2620  We are a Texaco gas station t...

Hi, I'm starting a career in networking with a goal of being CCIE Security or Wireless certified within 5 years.  I have very limited knowledge.  I am currently doing desktop support (2 years total).  Can I have some suggestions on where I should sta...

Greetings, I've got two sites, (one existing, one new), that are about 10 miles apart will be connected via fiber ring for about 6 months. We're preparing to ordering the ring but I'm unsure how to select bandwidth.  Can anyone recommend tools/readi...

Hi Is it possible to configure an 819 4G router to send an automated text response when a text message is recieved? Many thanks

What is the different between NOC Engineer and Network Engineer and which is higher position?

Is a Cisco Router 1841 with IOS 12.4(20)YA3 still supported? I ask this because I found this 2 links but they do not talk about that specific IOS version 12.4(20)YA3 http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software...

Servus,is there a command to get the power supply serial number of a cisco 3845."show inventory" doesn't show anything regarding power sypplies.With " show inventory raw" i can see empty information about Power Supply Container 1 and 2Andre