Other Network Architecture Subjects

HiPlease can you help.We've got a Netflow log collector and since we've upgraded an ASA 5520 from 8.12 to 9.1(2) it has stopped sending the field "IN_PERMANENT_BYTES". Does anyone have any idea how to re-add a byte or packet count field to the Netflo...

Hi there,I just wanted to bring attention to the broken links on the CCNA Discovery page. I am currently studying for my CCNA and was informed that there was a CCNA exam discount program offered by Cisco for completion of these learning modules. Not ...

Hi   Any one give a suggestion to stop restarting of oudoor AP aironet 1310.. I want to reset the device to factory settings pls give an idea to proceed my work.. I had given command in terminal "clear lwapp bvT private-config" it is giving command i...

Hello, I would like know if RV180 router support the link aggregation (802.3ad) i want to use this functionality with my DS214+ Synology NAS server (2x 1Gb eth)  many thxregards

Hi everybodyI have a IPSEC Site to site VPN between our HQ and our second office. The traffic of the VPN tunnel includes VOIP and data (mainly connection to terminal services). Furthermore the same internet line (in our second office) is used for int...

I am installing 2960-24ts-L and 2960-24ps-L switches, but before i do this i need to find out the inrush current for both of these devices and couldn't find that information on the data sheet, can someone tell me where i can get this information plea...

 Hi everybody,I have a little problem understanding this article: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/50421-config-register-use.htmlIf I want, the Router, to boot the IOS from for example tftp://192.168.0.1/NAME.xyz...

Saludos compañeros, en un router 1921 cuento con un módulo HWIC de 4 int, las cuales cuentan con subnets diferentes para alimentar diferentes bodegas, el puntos es que a estas subnets necesito configurarles una ancho de banda distinto, en la Wan teng...

I have been searching on Cisco.com and Google.com for answers to this question. We will possibly be integrating our existing all Cisco based network with a network that has all Nortel. This company is running OSPF. Currently we are running EIGRP and ...

Hi,    i am troubleshooting our ESA by using netstat, but when i run netstat all the events are running, is there a way to limit only or view only the listening ports?   Note: on the manual when running a netstat an option appears, but when i enter n...

Hi,I am trying to come up with a solution for one of our customers who has CE routers with one WAN link and seperate Voice network. The customer wants to integrate their Voice traffic int the MPLS network via the existing CE router with one WAN link....

Hi Please help me on this:How to configure QoS for Video Conferencing . which parameters I  should  follow for this.Installed VC Device like this VC Device àCore Switch [Native VLAN]àFirewall [5505 ASA]àCisco Router[2900]àISPNAT=192.168.X.X to 125.X....