I have been tasked with documenting every switch and every port on each switch in one of our switch closets. It contains 6 switches and is an absolute mess... My question is why is it that when I run a show mac address-table interface g0/0x on specif...
Forum Posts
I want my telnet session to time out after 3 minutes. But although I add:line vty 0 4 exec-timeout 3 0 login authentication local_authline vty 5 15 exec-timeout 3 0The telnet session remains on. Not sure why it does this. What am i doing wrong?
So we were tasked with this packet tracer activity. Recreate the topology, fill in the IP addresses, and connect the cables. All of my wires are connected, and I've entered the addresses listed below, but during Part 4: Verify ConnectionsI was unable...
So we were tasked with this packet tracer activity. Recreate the topology, fill in the IP addresses, and connect the cables. All of my wires are connected, and I've entered the addresses listed below, but during Part 4: Verify ConnectionsI was unable...
Like in the title I have an ISR1100 Router with 8 port switch and an additional 2 x LAN/WAN GigEth ports.I have 8 devices connected to the switch, and a WAN connected to one of the LAN/WAN ports, leaving 1 LAN/WAN ports free.I would like to trunk tha...
Hello everyone I have NCS 540 with 7.1.2 XR and now have logs full of these: RP/0/RP0/CPU0:2022 Mar 15 09:11:22.394 SAMT: logger[66386]: %OS-SYSLOG-4-LOG_WARNING : PAM detected disk (/var/log) on 0_RP0_CPU0 is full! Please cleanup ASAP to avoid any ...
Hello, We want to place in our network taps to duplicate the traffic for an analytic device.The switch will receive the replicate data (15-20 ports), all data that the switch will get already sent from another inline tap, and the traffic destination ...
Hello, I am wondering if my old C3KX-PWR-350WAC PSU will work in my new C9300 switches. Thanks!
There are many companies whose field of work is networks that sell domains. I want to know in detail what it means to sell a domain. Thank you
Hello, I am configuring remotely some switches 9500For this a laptop is connected to the Console port of the switch.Console port opens fine using standard values from Putty Terminal. But when the terminal has to show several lines, the laptop crashes...
Hi all,I have been trying to monitor the CPU usage of cisco FTDs. Right now, I am using the "cpmCPUTotal5minRev" to get the results. I want to know if there is a way to monitor the per thread CPU utilization?For example: If I want to get the followin...
I'm planning on beginning work in cisco routers. My current/previous employment is computer forensics/investigation. I ahve a SQL oracle expert cert and know my way around SQL. I plan on obtaining a CCNP cert in about 5 weeks, and I'm currently doing...
I have a TAC case open, but it seems like I am not getting through to the engineer. This is a fairly straight forward question to me.Does a switch forward broadcasts (specifically an ARP request or unknow MAC unicast) out all port, to include a port ...
Hi All, I am looking to have 2 access switch stacks - one in each building. The buildings are 300m apart so I will be using mmf between the buildings. I would like to have fibre redundancy so that the 2 stacks have connectivity in the event of a fail...
We will be deploying approx. 5-10 switches campus-wide. We will need to be able to administer port-security MAC filtering on these devices. This will be approx. 100 - 200 ports that will need to be configured. We will need to be able to add and del...
