Other Security Subjects

hiI have an ipsec setup between site a, a cisco 2600 with ios 12.2x, and site b, a netscreen 10 with netscreen os 5.xthe ipsec tunnel seems to be working, as both side can ping each others private networks ok. but there seems to be a mismatch in the ...

Does anyone have any recommendations as to how to deploy the Cisco Content Engine for the purpose of caching internet web content within the confines of the SAFE architecture? I am using the CE590 with ACNS 5.0. and will be deploying Websense for E...

Is it possible to trigger on Mcaffe Personal Firewall on cisco 3005 like you can do with Network ICE blackice defender or ZoneLabs Zone alarm? So if you dont have the firewall running you wont be able to login?

I am new to cisco IDS. I just configured the PIX firewall and now I need to configure Cisco IDS 3.0(5).All I know about is the following information, that I got from the catalyst switch in which it is installed.#module 5 : 2-port Intrusion Detections...

Hi everybody,When I debug a ISKMP negocoation (debug crypto isakmp) on a Cisco router 827 or 806, I can see that the port is set to 0:00:05:03: ISAKMP (1): ID payload next-payload : 8 type : 1 addr : 217.128.103.6...

have PIX Firewall with three interfaces, Problem routing to DMZ router---PIX----DMZ another interface to to inside i have class c addresss from my ISP i subneted into 2 network with 255.255.255.128 first rang of addressx.x.x.1- x.x.x.126 is used for ...

Upgraded the 4210 from S39 to S40, everything seemed normal but after the server restarted itself I can't access the 4210 from web, telnet, console, even tried attaching a monitor and a keyboard, nothing. Cold booted, light indication tells me the sy...

I want to configure Access list using mac Address of an interface. Is there any fecility in 1750 Router with an ios 12.05 ver. If there is any fecility to apply access list based on MAC Address please help me. thanking you ,

HI,I am using cisco 1751 to connect to my concentrator overseas. How can I create two tunnel to connect to the concentrator ?Pls advice

Hello.I have a question about the functionality of the access-list, I tried to blocking some range of internets addresses with acl, but it doesn´t work, I don´t know if I am right about the sintax (I think I do), my acl is the following:access-list e...

If two interface have the same security level then forwarding traffic between the two is not possible (for security reasons). Is there a way to allow a specific service only to be allowed between these two interfaces without modifying the security le...

Greetings,We have a situation where our 3005 concentrator fragments the packet containing its certificate during IKE Phase 1. This happens regardless of whether it's UDP IKE or tunnelled over TCP port 10000. The packet is fragmented using the MTU of...

I have two ISPs (ISP-router-A and ISP-router-B) and a pix between them and the DMZ.I want to use two proxy servers (proxy-A and proxy-B) in the DMZ to bring http access to the users in the LAN (there is another pix between de DMZ and the LAN).Then, I...