Other Security Subjects

Can the email name (default is notifier.domain.name) be changed anywhere in the VMS software to reflect a different name?

I need a solution, currently we have a Cisco 7000, with 4-port ethernet, and serial interface. Currently my customer has DSL link, with a ip-subnet range from the isp, which the DMZ, each host has a fixed internet ip address from the range. For redun...

Does anyone know how works IDS Director?Is possible to manage two 4235 Sensors with one IDS Director, or is necesary to install two IDS Director??Thank you

We have been doing some testing with Cisco 3015 concentrators and VPN 3.5 - 3.7 client software (Linux and Windows) and have observed the following issue.When using a Linux VPN Cisco client (3.5-3.7) and pinging or nmaping a remote computer the ping ...

Other than using the "cvtnrlog -d" utility is there another way to empty the CSPM server alarm database. Using this method can take several hours to complete the erasure which is inefficient, and can lead to the loss of important alarm data. Is there...

Does anyone know how to clear these messages away ? Although the version is match on both IDS and CSPM, but I still see this warning in Command tab. I have 2 IDSM and IDS 4230. I use CSPM Ver 2.33i to manage them.WARNING MESSAGES Specified IDS Senso...

I am setting up a hub and spoke vpn with a 515 and 5 506's and I need to be able to monitor the total bytes recieved and sent to and from the 515 for billing purposes. Can anyone suggest any easy way to keep track of these counters. we only use wind...

The "canned" reports from the VMS 2.1 security monitor seem to be geared towards IDS reporting. I have a VPN concentrator, Host IDS agents, a Dial up 3600 series router, and a 515R PIX that are all sending syslog or "defautt" alerts to the VMS machi...

Hello, Is someone can tell me if CMS access can be accounted?Regards,Nicolas

Hi,I have a simple question (I think), How can I block the messenger services from hotmail and yahoo? I appreciate your response.

Is it possible to have 2 nat 0 entries for the same interface? For example:nat (vpntest) 0 access-list 113nat (vpntest) 0 access-list 115Hope this is correct. If so, I've answered my two previous questions in regard to implementing 2 VPN's on the sam...

Three questions:1. Given a cspm233i - idsm service pack5 S29: how do you push customized signatures unto the sensor?2. What code base is used in developing the embedded signatures?3. How do you determine the buffer threshold on the idsm line card (su...

Is it possible to run VPN both from an IOS-router with dynamic public address and VPN3000-clients at the same time to a central IOS-router with static public address. Does this mean that there must be double dynamic crypto maps in the central router?...

I am trying to loadshare Appletalk over 3 equal paths. I understand I have to use the maximum-paths command, but I can only get one of the 3 T1's to come up and up for Appletalk. ("sho appletalk int brief shows the port up, protocol down.") Why won't...