"Start and end addresses overlap with outside interface address".How can I overload the ip address if I can't overlap it? The 1417 I use has no prplem with it!?IOS "like" is killing me" :)ThanksPhil Muller
ftp only works if i don't use access list or use:permit ip src_IP1 dst_ip2or both statementspermit tcp src_ip1dst_ip2permit udp src_ip1dst_ip2does not work with the following config:int fastethernet 0/0ip address 172.16.53.131 255.255.255.0ip access-...
Hi,I have a single system running Ciscoworks and RME. I have my topology all mapped out under Campus Manager and would like to import all these devices into the RME Inventory database. The documentation I have says this can be done easily but it does...
I have a flat network with 225 nodes, getting ready to buy host and network IDS. Will a 4235 be big enough for a FE with Gig backbone? Is there some kind of measure I can go by? Will it only look at a certain percentage...?Thanks!!We are looking at V...
I have a problem resolving the following situation: there is a W2K application server (WEB site) on the internal network. A VPN remote user connects to the VPN3030 concentrator and goes to WEB site. WEB site replys with the 1500 byte packets (MTU) a...
Hello,We are planning to make ISP connection redundant.We wil have two routers for the Internet access.Question 1:Can one sensor shun two routers at a time, and how to do it ?Have we only to add the two lines in managed.conf as follows ?NetDevice RO...
Can a 2651 assign IP addresses based on login credentials? The 2651 is forwarding the authintication to a radius server and we would like to assign the IP addresses based on login credentials.
We have 2 checkpoint firewalls and I just heard the reason we went with them. Can the pix allow ftp on something other than 21?? Obvious answers are: yes, we have an ftp server that can do this already. I just need to know if the pix will allow it...
I have client with cable modem and linksysOnly one pc can connect to vpn 3005 behind linksys which is the first one I installed the vpn client v 3.5 all other receive this error message " Exceeded 3 IKE SA negotiation retransmits .. peer is not respo...
K, after figuring out why my 4230's ssh wouldn't work, I figured it would be a snap to scp the update to the box. Wrong. scp returns "scp: warning: child process (/opt/att/bin/ssh2) exited with code 127." SSH.com has a FAQ about this at http://www...
I currently have a flat network with 200+ nodes, I am getting ready to implements IDS with a 4210, Pix (in place), 4235, Host and agents on my exchange and database servers. My question is:Where and how to I put the 4235? We plan on segmenting the ne...
Is it possible with Cisco ACS, to allow a User access only if the user comes from a spez. NAS. I would like to define a Group and if the user is a member of this group he only gets access if he comes from this spez. NAS. For example i have a VPN-Grou...
