Other Security Subjects

I just setup a Cisco 1121 Aironet WAP to work with WPA authenticating to a MS IAS server,(RADIUS). It works fine, clients can authenticate, access internet, etc.I moved the access point to the DMZ on PIX 515E and added nat statments and ACL for dm...

I am a real rookie at this. I just installed a PIX 501 with Firewall version 6.34 and PDM 3.0. I am trying to setup access rules for the following: Inside IP addresses 192.168.168.20-100 deny HTTP and allow FTP, SMTP and POP3. Inside IP adresses ...

Hi;We have a PIX 515E running butI would like to connect 2 ISP's to device to ensure uptime, can anbody point me in the direction of documents that would help me to accomplish this task. Background info... I currently have 3 physical interfaces with ...

i have a pix 515E ,can i use one public ip for pat.at same time use this public ip for static for web server

Hello,Can i monitor IOS FW using SNMP?Regards.

Hi, I upgraded the Pix 506e from 6.3(4) to 6.3(5). It then failed to allow external port 443 traffic to our internal web server.Error message on PIX when users try to connect is '710005: TCP request discarded from (External IP address)/50649 to ...

Dear allAs you all know we should develop a security policy for the customer before starting deploymnet & implementation.Does anyone develop something like this before that i can use as a template or a guide?

hello,is there any way an isa server on the outside of the pix can login to the domain which is inside of the pix?note that we could only put a single default gateway on the isa which i have currently on the external interface and pointing to the rou...

Our CSA agents are ver. 4.5.1.616I get the following warning messages on the CSAMC"The Network Shim is not installed/enabled on this agent, but the rules that apply to this agent require the network shim to be enabled. Functionality will be degraded ...

After upgrading PIX 6.3 to 7.0(2), we have the following problem, that the request for fragmentation from the MTU to a lower size is not working:a) we've enabled the Destination unreachable on the particular interfaceb) we've deactivated ICMP and ICM...

After upgrading from PIX 6.3 to 7.0(2), we have the following error message:%PIX-3-710003: UDP access denied by ACL from X.X.X.X/138 to inside:Y.Y.Y.255/138which are broadcasts from the MS systems... But as we didn't setup such an ACL and we where no...

I have a PIX 515 and I'm stuck back at 5.3 but I need to add access to my entire protected range to/from about a dozen unusual ports so I can run hosted Java applets. I was given the ports, and the IP addresses, but it took 45 DAYS!!! for my provide...

Hi,It seems like none of the switches are supporting SSHv2 client. All of them have SSHv2 server only. Does anyone know when Cisco will add SSHv2 client support on switches? Thanks for the info.

Dear All, Hi I am very new with this, I try to test my firewall by running firewall testing on www.auditmypc.com and I was wondered with the result below: We Found Private Information! 172.16.x.xx - Private IP Full details found [here] why they can f...