Other Security Subjects

hello,the PIX has reported this 2 messages:Dec 30 08:10:09 192.168.47.254 %PIX-6-302014: Teardown TCP connection 18217778 for outside:10.13.10.101/1037 to interapp:192.168.50.214/80 duration 0:00:03 bytes 6203 TCP Reset-ODec 30 08:10:09 192.168.47.25...

PIX OS 6.3What is the best way to insert a line into an access-list without renumbering all the lines or deleting and reinstalling the access-list onto an interface?I need to add an additional line somewhere above the "deny all" statement on my FW.

I have a 506e that is randomly dropping the inside connection. Running IOS version 6.1(2). Firewall shows uptime of weeks, so it does not appear to be rebooting. Ran logs to syslog server but did not see anything suspicious or abnormal, and it only ...

PIX 515E running 6.2(2)I have 2 hosts on a dmz subnet of 10.250.1.0/24this network connects directly to a firewall interface.i have an internal network of 10.1.0.0/16this net is separated by routershosts behind the internal network can ping 10.250.1....

Hi,My setup goes like this...Internal(100.x.x.101)---proxy---firewall---router---Internet---ISP (MAIL Server - 212.xxx.xxx.40). If i want to access my e-mails located at ISP. What are the protocols i should allow apart from SMTP, POP3? If anybody has...

Has anybody had an issue with Trend Micro and CSA? Specifically, I have created an exception in the Trojan Rule for Trend Micro\OfficeScan Client\Temp\upgrade.exe to be "downloaded from the network and execute". However, this event is still occurring...

Installed the Cisco VPN client on an XP Pro machine. I dial-up to the Internet using Earthlink and then connect to the VPN. Everything works great. I check ipconfig and I have my dial-up ip info including public DNS servers and my VPN ip info incl...

I have just purchased a Barracuda spam firewall. The problem Im running into is that I want to forward all smtp to the barracuda and all www to my existing mail server for web access. When I add the statics:static (inside,outside) tcp public_ip.1 s...

Hi,I have a question about DMVPN. I must implement an environment with a hub and <n> spokes. All spokes are connected to hub with leased lines thus on the hub I have <n> serial ports. Can I implement DMVPN with this kind of configuration?I tried a te...

Hello all,Simple security question here, I have implemented Access-lists on my inside interface, listed below:access-list inside_int permit tcp host 10.1.1.35 any eq smtpaccess-list inside_int deny tcp 10.1.0.0 255.255.0.0 any eq smtpAccess-list insi...

Hi, I am wondering if it is possible to assign a 2nd IP to the outside interface on a PIX-515e?

I have setup a MAC server with QT video streaming software for broadcast of a Tele-athon that will begin on Friday. I have a PIX-525 that protects our inside devices from outside access. I have setup the server with a public address,created a rule on...