11-11-2010 12:13 PM
We have recently installed Cisco Physical Access Manager V1.2.0. We are using
the included Badge Designer from Glips Graffiti Editor v1.4. Has anyone had any
luck adding a 3 of 9 barcode to the badge design?
Thanks,
Devin
Solved! Go to Solution.
11-23-2010 08:26 AM
Yes, I have attached a document showing the steps to use a custom font with the Badge Designer. In the doc, it shows usind the 3of9 barcode font as an example.
Hope this helps,
Mike
11-23-2010 08:26 AM
11-30-2010 06:27 AM
Michael,
Thank you so much for your reply this is just what we were looking for...
05-09-2013 12:02 PM
Mike,
That is super!! Thanks so much for your help with this issue. I have done quite a bit of work on UC with phone integration to CPAM. Please feel free to reach out to me at anytime with questions on this topic or others.
Best Regards,
Mark Bailey
05-09-2013 12:35 PM
Mike,
Just finished testing. Worked like charm. You are the man!
05-09-2013 01:19 PM
Yes, Mike has always been 'the man' when it comes to CPAM.
Thanks Mike!
Jim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide