cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1190
Views
3
Helpful
2
Replies

VSOM/Cameras doubts

panayiotiscy
Enthusiast
Enthusiast

Hello Netpros,

I am a bit puzzled in regards to the following:

1) Video settings(quality,bit rate,size etc) : Do they have to be identical on vsom and on the camera? I suppose that vsom is using the settings as defined while adding the camera and not the ones "reveived" by camera?

2) Time settings: Are the archives stored using the vsom's time or the camera's time?

Can you please clarify the above?!!

Thank you

1 Accepted Solution

Accepted Solutions

Jason Rossi
Beginner
Beginner

1) VSOM pushes the settings defined in the database to the camera. Subsequent changes locally at the camera will be overwritten by the VSOM settings. Subsequent changes in VSOM will be pushed to the camera.

2) Just like all the other settings, NTP info is pushed from VSOM to the camera. In 7.x the media server is the NTP server for the camera.



Sent from Cisco Technical Support iPhone App

View solution in original post

2 Replies 2

Jason Rossi
Beginner
Beginner

1) VSOM pushes the settings defined in the database to the camera. Subsequent changes locally at the camera will be overwritten by the VSOM settings. Subsequent changes in VSOM will be pushed to the camera.

2) Just like all the other settings, NTP info is pushed from VSOM to the camera. In 7.x the media server is the NTP server for the camera.



Sent from Cisco Technical Support iPhone App

Hello Jason,

Your answers are right to the point.

Thank you

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers