Routers - Small Business

Hi All   Please go easy on me here as Mitel is not my forte... We have a remote site that connects back the main site using a gateway to gateway VPN connection,(HQ 5505) (Remote 877) this is where our Mitel 3300 is located. At the remote site we have...

Hello, I own a plenty of RV042 routers in my environment and so I want to automate some tasks like periodic configuration backup, so Telnet connection would come in handy. I've already searched about and enabled Telnet using the URL http://<Router IP...

Hi All   Please go easy on me here as Mitel is not my forte... We have a remote site that connects back the main site using a gateway to gateway VPN connection,(HQ 5505) (Remote 877) this is where our Mitel 3300 is located. At the remote site we have...

I have a RV042G which I have configure failover from WAN1 to WAN2.  When WAN1 disappears, internet access switches over to WAN2 as advertised.  However, the VPN tunnel does not.  The tunnel is configured for WAN1 with Keep Alive, Dead Peer Detection ...

Comcast requires PD support. None of my computers can access the Internet without it. I can ping using ipv6 from the router itself, but that's rather worthless.

I have a field office connected to the main office by two RV220W and site-to-site VPN with the latest Firmware.  There is a networked HP printer at the field site (OfficeJet 8610) and I want to print to it from the main office. I can access the prin...

We have one computer that is dedicated to streaming live events.  We would like for this computer to always have network and Internet access priority.  How can I do this?   The streaming computer has a static IP.  I was thinking I should go into "Ban...

Dear Sir, I have purchased 2xPcs of RV042 Dual WAN VPN Router , from reseller in Dubai/UAE. I got it for a project in Jordan/Amman. When I key in the 192.168.1.1 at all browsing tools, to start setup & configuration setps,  I got this error msg. "SSL...

Hi there, I have two RV130W Routers. Site A VLan 1: 192.168.1.1 VLan 10 (Data): 192.168.10.1 VLan 20 (Voice): 192.168.20.1 Site B Vlan1: 192.168.30.0 I already set up a VPN between site with the Remote Subnet 192.168.20.0 <-> 192.168.30.0 and ot...

Hi all. I have setup a site2site VPN between 2 RV320. Everything for fine, except that the Windows client (win7) can not see the win2008r2 server at the far end through the VPN tunnel. The Win7 client in the same network sees the Windows server imme...

Hi, I need to recover/rescue a corrupted rv042g V1 Router, I have tried RV0xxV3_FirmwareRescueUtility_v4.0.0.7.zip 08-JUL-2011 without success, even says completed but still cannot log on 1.1, can only ping in Diag mode, they're must be a rescue firm...

I have a RV325 wired router, updated with the latest firmware (1.2.1.14 Sep 2015). I am trying to setup a VPN using iPhone configuration profiles and IKEv2. The iPhone client is requiring IKEv2 in this case. Does this router support IKEv2, and if so...

Hey all, I have 30 sites nationwide that will have an MPLS rolling out to them shortly. Most of these sites have an RV042 or RV320 at them already. TelePacific will have an MPLS device on our network at .253 at every location. Because of this, I'm th...

I have an older WRT610N Ver2 router at a location & I need to re-flash the firmware. Unable to locate ANY version. Anyone know of a link/ftp site where I might be able to get this? Thanks

I have a RV042G Firmware Version: v4.2.2.08 that will not accept entries in the Setup - Forwarding - Service Management. Currently there are 49 entries, some for Exchange, some for web server, some for remote desktop. I need to make more entries and ...