Routers - Small Business

Helosorry for my english...I'm using WRV210 with a radius server. The authentication working very well, but Accounting not working, i can't see any RADIUS Accounting packets.I presume that this feature is not supported on this model... right?what is ...

Hi folks, I have a UC520, and did a factory reset on my device, started setting up my dhcp pool but no ip address is assigned to any device, I read on one of the forums about a default .cfg not loading at startup, cant even connect via CCA cause ther...

Hi Cisco Community,In my office I have 2 Mbp/s (Down) internet speed and 2 Mbp/s (Up).My LAN network is 192.168.10.0/24My Laptop IP is: 192.168.10.9/24** I need a cisco router configuration to guarantee 99.99% All Traffic[TCP&UDP 1-65535] from my Lap...

I have a RV180W router that is not allowing data to be transfered via FTP.  Using the command prompt I can Connect to the FTP server and find the files but will get stuck when trying to download the files. Does anyone have an answer for me? Cisco had...

Is there a way to assign a specific PC on the LAN to use WAN1? We have two WANs and one has a much faster upload than the other and I want a certain user to always connect to the internet that way.Thanks

hi, guys thanks for time and help i need a guide for configure this crap of routersSITE A Static WAN IP X.X.X.X to 10.0.0.7 ipsec/vpn ports SITE B Dinamyc IP Address DynDNS 1 - First the Remote branch office RV042 when i enable the DynDNS services is...

LATEST: Do not upgrade, if you are using IPv6. There are issues not yet fully understood.After waiting about 1½ year a new firmware release is made available.The upgrade process from 1.0.4.17 did not run as simple as described in the release notes. I...

Hi,showing below error while i check SNMP Sessions:%SNMP manager not enabled IND--INT-RW-01#sh snmp sessions%SNMP manager not enabled snmp-server community AXIS RWsnmp-server ifindex persistsnmp-server host 192.168.X.X RW Regards,Ravinder Bora 

hello,Is that possible to get working VPN connections to that router from the standard VPN functionalities availiable in each Windows 7 ?I wouldnt like to use the QuickVPN, I would like to use normal connections from the Windows networking features.I...

Hi,I recently bought a Cisco RV220W Small Business Firewall. I need to set up two VLANs for a test environment. VLAN 1 is the default and will be allocated the 192.168.1.x subnet. VLAN 2 will be allocated the 192.168.16.x subnet. There are two aspect...

I try to do use the SSL VPN through the web portail. I had a lot of errors due to java, active X and windows7/8 64bits, visual C++...But now I have this error message from Virtual Passage : Error in intializing Virtual Passage!I have this error with ...

hi, guys thanks for time and help  I have a master site with an RV042 and RV042 three other site with as I can do routing between remote sites?Master Site 192.168.0.X/24SITE B 192.168.2.X/24SITE C 192.168.3.X/24 i need to ping site B from side Cand p...

Hello,Yesterday I have received by RV320 router. I have set it up with dual WAN:WAN 1 - 1 Gbps - PPPoEWAN 2 - 100 Mbps - Dynamic IPafter fixing the problem found initially that WAN1 get connected/Inactive, I found out that maximum transfer rate that ...

Hello,have someone an experience with the IGMP proxy functionality on the RV routers?I have setup IGMP proxy configuration on the RV180W according the administration guide (Firewall>Advanced Settings>IGMP configuration), but it does not work. The Rou...