Routers - Small Business

I uploaded new firmware (RV32X_v1.5.1.05_20191001-code.bin) to my rv320 to try and fix the lack of web interface on port 80 or 443. I now can't even log in on 192.168.1.1:8007 because it doesn't accept the password I set or the default one (cisco / c...

hello how i can to configure the wlan in c897vaw router ?vlan + ssid + pass + Wireless network encryptionwhat is the full configurations ? I don’t see the Dot11radio0 in the interfaces list! Please see in the photo  thanks for help

A speed test when connected to the WRVS4400N-v2 wifi gives me about 12Mbps down, while substituting a different router achieves over 60Mps with the same internet connection.  A wired connection achieves up to 80Mbps so it is definitely a WiFi issue.T...

I have an old WRVS4400N-v2 that I want to use as an access point on an existing LAN.I changed its IP to 192.168.1.2 (192.168.1.1 is my main router) and the "reserved ip" to "192.168.1.3", disabled DHCP, and set the operation mode to "Router".  I also...

Hi,I'm using the RV340 and our LAN has a second subnet. The hierarchy looks something like this: Internet WANRV340 ( 192.168.15.1 )192.168.15.0/24 LAN 1Gateway ( 192.168.15.2 / 172.16.1.1 )172.16.1.0/24 LAN 2 The RV340 has a static route to forward a...

We decided to use RV160W to block certain websites during working hours. Settings were like this:- Enable Content Filtering: Yes- Block Matching URLs: Yes - Filter by Domain: facebook.com  For the very first time, the filter worked as a charm and use...

Each time I try to get information about new firmware I get ""BSD return code: 404. Not found. This error may occur if the file that you are trying to access has been moved or deleted"Also when I try to download new firmware from my device console I ...

Hello, all.Need some professional help as I can't resolve the problem myself. I'm not a professional admin or network engineer, just supporting a small office network.Purchased a Cisco RV160-K9 V03 about 3 weeks back, have upgraded to FW 1.0.01.03 ju...

Hi, Having a recurring issue where periodically the router drops the WAN connection to the Cable Modem.The Cable Modem is in Bridge Mode and has a dynamic IP AddressWe have via a Dynamic DNS service a DynamicDNS.com address for this router as it is p...

I have a cisco rv320 that alone returned to factory settings, any probable cause? 

Have someone can monitor RV34X WAN traffic? Please provide me OID. I try many way on SNMP such as scan on all MIB file provided by cisco SMB, but still no OID report the bandwidth. Thanks

I have a brand new RV340, did firmware upgrade to 1.0.03.15, reset to factory settings after upgrade. I'm trying to monitoring it's interfaces, tried with Cacti and Zabbix, no success. Debugging I find out that doing smnpget I can't see counters incr...

I  have 2 internet connection, one  has 100mbps and other has 1000Mbps. My ISP has an internal speedtest  and with my laptop connected directly to the service provider I get 975 mbps with RV i get only 97Mbps, and i have try all the setup regarding t...

I have a customer that I just updated their edge router to a RV160W.  Not a big customer.  The RV160W is providing all of the functions for th business. A security camera company installed cameras and a recording device.  The location has multiple bu...