Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...

translator.png Asolution.png htlm-source.png insertcode(1).png
Kelli Glass by Community Manager
  • 10028 Views
  • 7 replies
  • 16 Helpful votes

Good evening, we have a couple of spoke sites that have a requirement to bridge a VLAN between them.  One of the sites (Spoke Site A) has devices communicating with each other using BACnet. There is a Windows machine on that same VLAN running the sup...

Hi, On a fractional circuit…say 20 Mbps, connected via a gigabit interface it is understood that a shaper should shape the outbound policy-map to match.   What about a 100 Mbps circuit where the gigabit interface connecting to the provider has been ...

Hello, I have a question using NAT pool on a Cisco Router. How is the assignment between the real IP and the NATed IP done. i.e. will 123.123.123.1 always get the 10.10.10.1 ... or are the used randomly? thx

Hi guyzz, i am having a pppoe connection in modem, a cable is then connected to Cisco rv042. Internet works fine on direct link of pppoe. DHCP is enabled from modem which provides 192.168.1.0 range IP to router. I have purchased Static IP  for VPN t...

We were going through a comparison between the Cisco 4xxx series of routers.The Cisco 4321 mentions the form factor as the 1 rack unit (RU) Desktop. I would like to know what does this exactly mean?Is this some king of software running on a desktop o...

I created an IWAN test bed with CSR routers in the lab following examples in this link: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/pfrv3/configuration/xe-3s/pfrv3-xe-3s-book/pfrv3.html Below is my topology I don't see any channels on the MC ro...

Dong Ha by Level 1
  • 2260 Views
  • 10 replies
  • 0 Helpful votes

Hi All I have 2 internet links now from Different ISP's On my first ISP we have the DMZ with the public IP addresses in so we don't have to NAT. However as we have a second ISP with a new address block, how is it best to set it up, should we change t...

Hello, I currently have a 2821 ISR w/ 256 MB of DRAM running IOS Version 12.4(11)T1. My current ROM  version is Version 12.4(1r) [hqluong 1r]. I would like to upgrade IOS to 12.4(15)T17 on the device. Is it necessary to upgrade ROMMON prior to the IO...