Routing

Hello Community Team, I have an error  in this card.The show platform issues the following error: ASR-1004-IBM#show platformChassis type: ASR1004             Slot      Type                State                 Insert time (ago) --------- ------------...

HiI got a problem with a catalyst 4503 regarding the configuration lock.Now I can enter in configure terminal but I cannot configure anything.If I try to set something in configuration I will receive this output:Configuration mode locked exclusively ...

Hi,Can any one of you help me with an explanation why I am seeing the 1:1 static NATed IP getting patted as well with the below setup. It is some times getting patted using the internal IP (172.X.X1.2) and <public IP1>. And this happening only for th...

Hello,We are planning to replace the existing router with Cisco router with at least 4 ten Gig port.I am thinking of 1000 series of cisco router.I am using it for BGP boarder router accepting full routing table.Pls suggest me if there is any better o...

Hi fellow experts, I have been told by the customer that, they have a DTS fiber optic to connect between HQ and branch, Cisco 2911 on both side. They also have a WAN link which connect to a ISP as a backup link. When the DTS fiber link fails, they ma...

I need to set up a DMZ sollution with some VLAN's to from our mainsite to several brachoffices.My main switch in the mainsite is a HP 5406zl - and to protect the mainsite I'll got a ASA 5515x, the brachoffices has Catalyst 3560'sI have several VLAN's...

Dear Members,I am experiencing high CPU problem on a Cisco 3845 router model, the offending process is name "Collection proce" I found some similar post but turned to switch in order to address this issue and I disabled NetFlow and multicast configur...

Hi everybody.   I was configured this 3G card for access to internet in cisco oruter 2901 via 3G but no success connection I have.when I show dialer I see that I have failed to dial. sh dialer  Ce0/0/0 - dialer type = IN-BAND ASYNC NO-PARITYIdle time...

Hi Cisco Experts:I have a design question: If I have a WAN connection on one primary router(AT&T - BGP ) and a second WAN connection (via VPN - Tunnel Connection - Public Internet) on a secondary Router, my failover won't work. I want all outgoing da...

Hi, I have configured a Cisco 887, I can connect to the internet through the router, but as soon as i connect PC i can't connect. i have checked that my dialer 0 comes up and i get an ip address. but i cant ping anything on the Internet.here is the c...