01-20-2021 07:52 PM
Hello, beautiful people!
I ´m working on a project based on the use of IoT for attendance control of university students.
I was representing the network topology in cisco packet tracer with PCs(representing the IoT devices i´m gonna make), Acess Points, Switches and apparently they are working(They can communicate themselves, apparently). But the problem is that I´m having trouble building the server that will be "the internet"(The IoT will connect to a webservice) since I cannot communicate with him by sending UDP packets.
I am quite inexperienced in network design and cisco but i want to learn. Can provide me some suggestions? Thanks a lot!
An image of my current design
Solved! Go to Solution.
01-21-2021 12:10 AM
Hello @JoseAparicio61812 ,
you will need to configure NAT Network address translation on the router connecting to the internet so that private addresses can be translated to a public address.
Hope to help
Giuseppe
01-21-2021 12:10 AM
Hello @JoseAparicio61812 ,
you will need to configure NAT Network address translation on the router connecting to the internet so that private addresses can be translated to a public address.
Hope to help
Giuseppe
01-21-2021 01:05 AM
Hello,
problems meaning what exactly ? In your project snapshot it looks like the physical links the cloud and the server are down ?
If that IS a Packet Tracer poject, post the zipped project (.pkt) file.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide