Cross connect between 2821 with WIC-2T to 1921 with HWIC-2T

[markdd1978]

Hello al

i have 2 routers  2821 with wic-2t serical card and 1921 with hwic-2t serial card

My question is - can i connect between those two serials card with serial cross cable ?

Thank

[turnera]

DCE to DTE connection will work just fine.

[Rick Morris]

You can connect the two together but you will need to make sure one supplies clocking, and I am not sure on the media type but if you use RJ-45 make sure the pairs are flipped at the distant end.

For instance:

Router A

1-2-4-5

|- |- |- |

4-5-1-2

Router B

This is known as a T1 crossover

[Syed Siraj Uddin]

Yes, you can connect back to back using

Smart Serial DTE Interface To Smart Serial DCE Interface Crossover Cable.

Normally this is done for studying purpose.

I did purchase some of them last year from http://www.anthonypanda.com/?sp=&p=6&cat2=0&cat1=0&cat0=2&id=22&cat1=0&cat0=2&new=&more=&s=46b15dcbbdd425421eb3389650329c54〈=en