10-05-2021 08:07 PM
Hi,
I would like to disable RIP and Telnet on firepower 1140 . But i don't know how to check RIP/telnet is disable .
let me know how disable RIP and Telnet on firepower and how to show they are disabled ?
Solved! Go to Solution.
10-10-2021 10:39 PM
Hi, @MrBeginner
FTD by default not support telnet as per below guide. and as mentioned earlier , RIP is not working until you specifically enable it.
rate this and mark as answer if this solved your concern
10-11-2021 03:15 AM
Hello @MrBeginner ,
I have a pair of FP1140 in HA using FDM
the GUI has no option to configure RIP that you can configure using FlexConfig ( access to ASA CLI) I'm in 6.6.4
So RIP should be disabled.
telnet connection should not be supported as noted
Hope to help
Giuseppe
10-05-2021 08:50 PM
Hi,
use below document to configure/change relevant services.
RIP is disabled unless you configure RIP parameters.
Rate this and mark as answer if this solved your concern
10-06-2021 02:01 AM
Until you specifically enable RIP, its not enable by default.
You can check RIP Enabled or disabled here :
telnet |
FTD does not support Telnet connections. Use SSH instead of Telnet to access the device CLI. |
you can configure as below :
10-06-2021 09:45 PM
Hi @balaji.bandi and @Kasun Bandara ,
Sorry for misunderstanding. I forgot to mention FDM . I am not using FMC.
10-10-2021 10:39 PM
Hi, @MrBeginner
FTD by default not support telnet as per below guide. and as mentioned earlier , RIP is not working until you specifically enable it.
rate this and mark as answer if this solved your concern
10-11-2021 03:15 AM
Hello @MrBeginner ,
I have a pair of FP1140 in HA using FDM
the GUI has no option to configure RIP that you can configure using FlexConfig ( access to ASA CLI) I'm in 6.6.4
So RIP should be disabled.
telnet connection should not be supported as noted
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide