i need to load balance traffic from R3 going to R1's loopback 22.214.171.124 and at the same time load balance traffic from R3 going to R2's loop back 126.96.36.199
how can this be achieved, i always managed to load balance only one of the destinations but i can't do both..
lets say 188.8.131.52 from R3 prespective = 64 + 1 = 65 interface f0/0
if i want to load balance over f0/0 and f0/1 then
i'll increase the cost of R3 f0/0 to 74
then 184.108.40.206 f0/0 = 74 + 1 = 75
f0/1 = 64 + 10 + 1 = 75
but this will be the opposite if i wanted to load balance traffic heading to 220.127.116.11
appreciate your help everyone...