i need to load balance traffic from R3 going to R1's loopback 220.127.116.11 and at the same time load balance traffic from R3 going to R2's loop back 18.104.22.168
how can this be achieved, i always managed to load balance only one of the destinations but i can't do both..
lets say 22.214.171.124 from R3 prespective = 64 + 1 = 65 interface f0/0
if i want to load balance over f0/0 and f0/1 then
i'll increase the cost of R3 f0/0 to 74
then 126.96.36.199 f0/0 = 74 + 1 = 75
f0/1 = 64 + 10 + 1 = 75
but this will be the opposite if i wanted to load balance traffic heading to 188.8.131.52
appreciate your help everyone...