04-28-2019 10:59 PM
Hi everyone,
i am having an issue with my 3600x switch,i’ve upgraded switch ios for using sfp+,our 10gig port is up and the direct link ping is normal but my bgp and ospf routing protocol is not work when use 10gig port while routing protocol work normally with 1gig port
please can someone help me
thanks
04-28-2019 11:10 PM
What is the debug shows in logs ?
Can you post model of the device(full) and show version. if posssible show run and output of the problem also.
04-28-2019 11:32 PM
04-29-2019 01:02 AM
Hi,
Please Share the protocol information and interface table from both routing protocol.
04-29-2019 02:56 AM
04-29-2019 12:10 AM
Check speed settings on interfaces you are using to establish neighborship. Would be great to check the same on neighbors. Hardcode it on both sides if you are going to use 10g
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide