ā03-25-2014 01:32 AM
After an upgrade of N1000v from SV1(5.2) to SV2(2.2) , when i started to put the new vem with the new vib file , so i have a mixed of the new vem and the old one i have this message :
%VDC_MGR-2-VDC_CRITICAL: vdc_mgr has hit a cri
tical error: SPROM data is invalid. Please reprogram your SPROM!
the module are now :
Mod Sw Hw
--- ------------------ ------------------------------------------------
1 4.2(1)SV2(2.2) 0.0
2 4.2(1)SV2(2.2) 0.0
9 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
11 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
12 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
13 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
15 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
18 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
19 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
20 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
21 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
22 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
23 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
24 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
25 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
26 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
27 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
28 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
29 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
30 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
Does anybody know the meaning of the log message. Is something i can do, or the message can disappear after i've completed all the vem ?
Thanks
Federica
Solved! Go to Solution.
ā04-10-2014 12:27 PM
You are running into the following defect
https://tools.cisco.com/bugsearch/bug/CSCul65853/
The error message occurs during the time aVEM is attached to VSM and can be ignored.
Thanks,
Karthic
ā04-03-2014 09:39 AM
I am experiencing the same issue, did you get any resolution to this issue?
Thanks,
Joe
ā04-04-2014 08:54 AM
Hi,
no resolution on that.. The log is stopped after the new vem insertion.. It seems a log from NXOS , properly of an hardware device (7k, 5k), it seems strange on n1000v talking about a reprogramming of SPROM... no commands on that...
Let me know if you resolve the issue.
Federica
ā04-10-2014 12:27 PM
You are running into the following defect
https://tools.cisco.com/bugsearch/bug/CSCul65853/
The error message occurs during the time aVEM is attached to VSM and can be ignored.
Thanks,
Karthic
ā04-10-2014 11:36 PM
Thanks Karthic ,
i'm pleased to know that no action is to be done...
Have a good day
Federica
ā05-09-2015 09:38 PM
Thank you Karthic for sharing such a crucial information with users, 5+ :-)
This information has been captured in Document.
Regards,
Vinay Sharma
Community Manager
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide