cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
532
Views
0
Helpful
2
Replies

n4k tftp attempt failing

c.fuller
Level 1
Level 1

Hello -

I am trying to upgrade the software image on my n4ks.   I have the mgmt0 interfaces connected to the network and setup for use in the management context.   I can manage the switches and I have tacacs+ working ok by adding the "use-vrf management" command in the AAA group configuration.  So

far so good.   However, when I try to tftp an image to the bootflash I get an error indicating that "no route exists to host".    The default-gateway is set for

the mgmt0 interface.    I am wondering what else I need to do to allow tftp over the mgmt0 interface.  I am assuming I am missing something in the config perhaps related to the VRF setup.   Maybe an ACL requirement?   I am just getting up to speed with the NX-OS platform.  

Thanks

Chuck

1 Accepted Solution

Accepted Solutions

Prashanth Krishnappa
Cisco Employee
Cisco Employee

Try the copy command with vrf included..

N4k-Top# copy tftp: bootflash: vrf management

Enter source filename:

View solution in original post

2 Replies 2

Prashanth Krishnappa
Cisco Employee
Cisco Employee

Try the copy command with vrf included..

N4k-Top# copy tftp: bootflash: vrf management

Enter source filename:

That was it. Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: